Specification

© 2016 AS America Inc.© 2016 AS America Inc.
SELECTRONIC
®
INTEGRATED
ELECTRONIC PROXIMITY LAVATORY FAUCET
WITH ABOVE-DECK MIXING, BASE MODEL
(11/16)
RECOMMENDED SPECIFICATION:
Electronic, sensor-operated lavatory faucet shall feature a programmable, multi-function sensor and an electronically operated solenoid
valve. Features a vandal resistant cast brass body with dual inlets with check valves and in-line filter screens. Single post mounting. Integrated
design with sensor, solenoid valve and all electronics enclosed in the spout. Shall also feature above-decking mixing option using ceramic
disc valve with hot limit safety stop. Shall meet ANSI A112.18.1 and ANSI 117.1 codes. Fitting shall be American Standard Model # 705B_.2_5.
MODEL NUMBER:
■ BASE UNIT (Does not include power supply)
❑ 705B.205 0.5 GPM pressure compensating,
vandal-resistant multi-laminar spray.
❑ 705B.215 1.5 GPM pressure compensating,
vandal-resistant laminar ow outlet with adjustable
face.
■ POWER KITS (Must be purchased separately)
❑ PK00.PAC Includes universal Plug-In AC
power supply.
❑ PK00.MAC Includes Y-splitter and 10' extension
cable.
❑ PK00.HAC Includes universal Hard-Wired AC
transformer and 10’ extension cable.
❑ PK00.WRK Includes 10-Year battery pack and
holder.
■ OPTIONAL Battery Back-Up
❑ PK00.BBU Allows faucet to continuously operate
during a power failure.
■ OPTIONAL 4" or 8" Deck plates
❑ 705 P. 40 0 4" brass deck plate with 1/4" xation
studs and quick spin nuts. Includes xation pin
that prevents the faucet spout from rotating.
■ OPTIONAL Mixing Valve
❑ 605XTMV1070 Thermostatic mixing valve.
20" exible stainless steel inlet hoses with 3/8"
compression ttings. ASSE 1070 certied
down to 0.35 gpm.
POWER OPTIONS:
• Universal Voltage: 100 - 240 VAC, 50/60 Hz
• Plug-In AC: Includes Class 2 UL certied universal
Plug-In AC power supply with 6' long power cord.
• Hard-Wired AC: Includes Class 2 UL certied universal
Hard-Wired AC transformer (electrical box by others).
• Multi-AC: One AC transformer can power up to 15
faucets and/or ush valves in a daisy chain
conguration. POWER SUPPLY NOT INCLUDED.
PRODUCT FEATURES:
• Flexible Selectronic
®
Platform with programmable,
multi-function sensor.
• Hygienic, touch-free operation
• Easy Installation: Simple integrated design; sensor, solenoid
valve and electronics are enclosed in the spout. No control
box below deck.
• Above-Deck Mixing: Allows user to manually adjust
temperature. Leak-free ceramic disc valve. Hot limit safety
stop to reduce the risk of accidental scalding. Installer can set
temperature and remove handle to prevent user adjustment.
• Dual Inlets: For hot and cold water. Inlet hoses include check
valves to prevent cross ow and lter screens to protect the
solenoid valve.
• Seamless Cast Brass Body: No crevices. Easy to clean.
Vandal-resistant.
• Optional Auto Purge Feature: Faucet can be programmed to
open at a pre-determined time after last use to purge the faucet
and water lines.
• Safety Timer: Helps prevent vandalism by turning off the faucet
if the sensor is covered for 55 seconds or more. Timing is
adjustable with optional remote control.
• Adjustable Range: Detection zone can be adjusted manually
or with optional remote control.
• Fail-Safe: Faucet automatically shuts off upon loss of power
or dead battery. Prevents costly excess water usage and
potential ooding.
• Lead-Free: Faucet contains ≤ 0.25% total lead
content by weighted average.
GENERAL DESCRIPTION:
Electronic faucet with proximity operation. Integrated design
with sensor, solenoid valve and electronics enclosed in the
spout. Includes Above-Deck Mixing option with ceramic disc
valve, hot limit safety stop and removable handle. Vandal-
resistant seamless, cast brass spout with single post mounting.
Water pressure range from 20 to 125 psi. Dual inlets to spout:
18" exible stainless steel inlet hoses with check valves, lter
screens and 3/8" compression ttings.
FINISHED WALL
OR BACKSPLASH
457 mm
(18")
MIN. 1" CLEARANCE
165 mm
(6-1/2")
32 mm (1-1/4")
66 mm
( 2-5/8")
38 mm
(1-1/2 )
140 mm
(5-1/2")
191 mm
(7-1/2")
191 mm
(7-1/2")
3/8" COMPRESSION
CONNECTORS
MOUNTING
SURFACE