Specifications

ManualsBrandsAmerican Standard ManualsHome building and Decor6059.193

Installation Instructions

(In Toronto Area only: 1-905-3061093)

Certiﬁed to comply with ASME A112.18.1M

To l e a r n more a b o u t Amer i c a n S tandard Fa u c e t s v i s i t o u r website a t : www.us.amstd.com or U.S.

customer's e-mail us at: sensor@americanstandard.com

For Parts, Service, Warranty or other Assistance,

please call

(855) 752-9259 (In Canada: 1-800-387-0369)

NOTE TO INSTALLER: Please give this manual to the customer after installation.

(In Toronto Area only: 1-905-3061093)

M 9 6 5 27 1 R EV. 1.3

Product No.'s & Options

Speciﬁcations

How to Install

Electrical Hook-up

Maintenance

FAQ,s

Replacement Parts

2-3

4-5

6-7

6059.193 Infection Control Faucet shown Installed on

American Standard 9118.111 Infection Control Sink

6059.193

SELECTRONIC®

Hard-Wired AC Powered Infection Control

Lavatory Proximity Faucet

PRODUCT NUMBER

CAUTION: Use only American Standard

supplied cable sets. Using non-AS supplied

cables, or cutting, splicing or modifying any

components will void the warranty.

Summary of content (9 pages)

PAGE 1
I n s t a l l a t i o n I n s t ru c t i o n s SELECTRONIC® Hard-Wired AC Powered Infection Control Lavatory Proximity Faucet PRODUCT NUMBER 6059.193 CAUTION: Use only American Standard supplied cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty. Product No.'s & Options 1 Specifications 2 How to Install 2-3 Electrical Hook-up 4-5 Maintenance 6-7 FAQ,s 8 Replacement Parts 9 SP FR 6059.
PAGE 2
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. UNPACKING All American Standard Faucets Are Water Tested At Our Factory. Some Residual Water May Remain In The Faucet During Shipping. 1. Remove the fitting and loose items from the carton. The illustration below shows the fitting and all loose items after they have been removed from the carton.
PAGE 3
Roughing-in Dimensions FINISHED WALL (53mm) 2-1/8" DIA. 32mm (1-1/4) DIA. GENERAL DESCRIPTION: (243mm) 9-9/16" (127mm) 5" Electronic faucet with proximity operation. Vandal resistant solid brass construction single post mounting. Operates on AC permanent power. In-line strainer for solenoid is integral. Single inlet 3/8 compression, built-in checks, and flexible MOUNTING stainless steel 16-1/4" reach inlet hose for spout SURFACE connection.
PAGE 4
2 MOUNT ENCLOSURE; Fig. 2 Fig. 2 21" (533mm) NOTE. The illustration shows the Infection Control FAUCET mounted on the American Standard Infection Control Sink. Faucet can be installed on almost any sink or countertop. For Faucet installation on the American Standard Infection Control Sink, see instruction sheet No. 7301793-100 (Infection Control Sink System) supplied with Sink for more detailed information. 14" (356mm) 1.
PAGE 5
ELECTRICAL INSTALLATION Fig. 1 1 1 ELECTRICAL CONNECTIONS; Fig. 1 CAUTION Before opening ENCLOSURE turn off power from electrical box . NOTE: Make power supply connection before mounting ENCLOSURE (1) to wall. Fig. 1b. 1. Remove ENCLOSURE COVER (1). Fig. 1. 2. Feed the EXTENSION CABLES (2) from the Faucet through the top of ENCLOSURE (3). Fig. 1a. Fig. 1a Fig. 1b 2 3. Remove SPLIT PLUG (4) from POWER SUPPLY GROMMET (5). Insert POWER CORD (7) into SPLIT PLUG (4).
PAGE 6
Fig. 2 Unit #1 Unit #2 Unit #3 FAUCET WIRE CONNECTORS FAUCET WIRE CONNECTORS FAUCET WIRE CONNECTORS 10 ft. EXTENSION CABLE 6 10 ft. EXTENSION CABLE 6 9 5 6 9 5 8 8 ELECTRICAL BOX OR EQUIVALENT BY OTHERS 2 FOR HARD WIRED AC-POWERED Fig. 2a (MULTI HOOK-UP); Fig. 2, 2a, 2b Unit #1 2 SENSOR CABLES NOTE: Make power supply connection before mounting ENCLOSURE (1) to wall. Fig. 1b. 1a 6 1 1. Remove COVERS from all ENCLOSURES (2). Fig. 2. 2.
PAGE 7
TEST INSTALLED FAUCET Fig 1 TION DETEC N ZO E TO ENSURE A LAMINAR WATER FLOW the air must be slowly purged from the spout. To do so, cover the SENSOR (1) while slowly opening the water supply valves. When the water flows as a solid, smooth, steady stream, uncover the SENSOR (1) and fully open the water supply valve. Fig. 1. MAINTENANCE 1 HOW TO CHANGE SENSOR RANGE; (Factory set at 6") Fig. 2, 2a 1 Detection Zone: 2" - 10" (50mm - 250mm) Default: Set at Factory 6" (150mm) 1.
PAGE 8
4 HOW TO CLEAN AND REMOVE Fig.4 THE FLOW RESTRICTOR; Fig. 4 3 1 1. Remove SET SCREW (1) with FLAT BLADE SCREWDRIVER (2). Pull off SPOUT (3) from faucet base. Fig. 4 & 4a. REMOVE SET SCREW (1) 2 2. Remove HOUSING (4) and remove FLOW RESTRICTOR (5). Fig. 4b. 3. Rinse clean FLOW RESTRICTOR (5). Reassemble and install into SPOUT BASE (6). Reassemble SPOUT (3) onto SPOUT BASE (6) and tighten SET SCREW (1). Fig. 4. Fig.4b 4 Fig.4a 5 3 PULL UP TO REMOVE SPOUT 4 6 5 GENERAL CLEANING; Fig. 5 Fig.5 1.
PAGE 9
FAQ'S Q: How will I know if battery needs to be replaced? A: Valve does not open and sensor blinks 2 times interrupted by pause for up to 7 days. Q: Why does the faucet operate the opposite of expected-Turns On when not in sensor range, but turns off when in sensor range? A: Sensor wires to solenoid are reversed. Q: Why has the flow rate of the faucet reduced significantly? A: Check and clean aerator and strainer.