Specification

A57
© 2014 AS America Inc.
HAMPTON
TWO-HANDLE BOTTOM-MOUNT KITCHEN FAUCET
WITH BRASS GOOSENECK SPOUT
GENERAL DESCRIPTION:
Durable brass construction. 1/4 turn washerless ceramic disc
valve cartridges. Brass 22mm (7/8") diameter swivel spout (360˚
rotation). One -half inch male inlet shanks with brass coupling
nuts. 2.2 gpm/8.3 L/min. maximum flow rate
, 1. 5 gpm/5.7 L/min,
maximum flow rate for F15 models.
Color-matched hand spray.
Cap provided for less spray applications.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Brass Construction and Cast Brass Waterway:
Durable - Excellent in high use applications. Ideal for
prolonged contact with water.
Larger Spout: Increased spout height, reach and diameter.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
Choice of Finishes: Available in a wide range of durable
finishes.
MODEL NUMBER:
4751.732 Bottom-Mount Kitchen Faucet
Color-matched Handspray. Metal lever handles
.
4751.732.F15 Bottom-Mount Kitchen Faucet
Color-matched Handspray. Metal lever handles
.
____.____.
SUGGESTED SPECIFICATION:
Two handle bottom-mount kitchen faucet shall feature brass construction with all brass inlet shanks and coupling nuts. Brass
swivel spout. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model #
4751.732.
____.____.
Product
Number
Description
Finish Options
4751.732.F15
4751.732
Kitchen Faucet with Handspray - 1.5 gpm/5.7 L/min. maximum flow rate
Kitchen Faucet with Handspray
-
2.2 gpm/8.3 L/min. maximum flow rate
PVD
Polished
Brass
099
Polished
Chrome
002
PVD
Satin
Nickel
295
Oil
Rubbed
Bronze
224
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
220mm
(8-5/8")
238mm
(9-3/8")
330mm
(13")
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9 & Annex G
59mm
(2-3/8")DIA.
152mm - 305mm
(6" TO 12")
FLEXIBLE
28mm
(1-1/8")
DIA.
35mm to 38mm
(1-3/8" to 1-1/2")DIA.
MOUNTING
HOLES (3 PLACES)
89mm
(3-1/2")
35mm
(1-3/8")
MAX.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
FLEXIBLE
HOSE
60mm
(2-3/8")
51mm
(2" D.)
127mm
(5")
54mm
(2-1/8") MAX.
21mm
(13/16" D.)
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
1. 5 gpm/5.7 L/min. FLOW RATE
2.2 gpm/8.3 L/min. FLOW RATE
Revised 3/14