Installation Guide

ManualsBrandsAmerican Standard ManualsKitchenHampton 2-Handle Standard Kitchen Faucet in Chrome

KITCHEN FAUCETS

4751.732

4751.732F15

M 9 6 8 7 2 1 R E V. 1. 4

Certiﬁed to comply with ASME A112.18.1M

Plumbers' Putty or Caulking

Adjustable Wrench

Channel Locks

RECOMMENDED TOOLS

INSTALL FAUCET

INSTALL VALVE BODIES

Install LOCK NUT (1) and RUBBER WASHER (2) onto SPOUT BODY (3).

Insert SPOUT BODY (1) through hole from underside of SINK.

From under sink tighten LOCK NUT (1) to secure SPOUT.

Place RUBBER RING (4) into SPOUT ESCUTCHEON (5) and screw

ESCUTCHEON (5) onto SPOUT BODY (3) until snug against

internal stop.

Install LOCK NUT (1) and RUBBER WASHER (2) onto VALVE BODIES (3).

Insert VALVE BODY (3) through hole from underside of SINK.

From under sink tighten LOCK NUT (1) to secure VALVE BODY (3).

Insert SEAL WASHERS (6) into SPOUT BODY SUPPLY HOSES (7) and

tighten connection to VALVE BODIES (3).

Place RUBBER RING (4) into ESCUTCHEON (5) and screw

ESCUTCHEON (5) onto VALVE BODY (3) until snug against internal stop.

Phillips Screwdriver

Flat Blade Screwdriver

Installation

Instructions

CAUTION

Turn off hot and cold water

supplies before beginning.

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

Summary of content (4 pages)

PAGE 1
Installation Instructions ® 4751.732 4751.732F15 KITCHEN FAUCETS Thank you for selecting American-Standard... the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ASME A112.18.1M M 9 6 8 7 2 1 R E V. 1.
PAGE 2
3 INSTALL HANDLES CROSS HANDLE Push ADAPTER (2) into HANDLE BASE (3) in a way that the male square on the ADAPTER (2) fits in the female 8 point star of the HANDLE (4). Turn HANDLE STEM (1) to the off position. Push HANDLE BASE (3), ADAPTER (2) and HANDLE (4) onto VALVE STEM (1). Tighten HANDLE SCREW (5). Push INDEX CAP (6) in top of HANDLE (4). LEVER HANDLE Push ADAPTER (2) into LEVER HANDLE BASE (7) in a way that the male square on the ADAPTER (2) fits in the female star of the HANDLE BASE (7).
PAGE 3
5 FITTING WITH SPRAY Place SPRAY HOLDER (1) into separate hole of SINK (2) and assemble NUT (3) onto shank from underside of SINK (2). 1 Hand tighten NUT (3). 2 3 6 FITTING WITH SPRAY Feed SPRAY HOSE (1) through SPRAY HOLDER (2) and attach COUPLING NUT (3) of HOSE (1) to HOSE ADAPTOR (4) on valve body. Tighten COUPLING NUT (3) firmly. 1 4 2 3 7 TEST INSTALLED FAUCET Remove AERATOR. With handles in OFF position, turn on water supplies and check all connections for leaks.
PAGE 4
® KITCHEN FAUCETS MODEL NUMBERS 4751.732 4751.732F15 013311-YYY0A INDEX BUTTON 918428-0070A HANDLE SCREW 060469-YYY220A (2.2 GPM) SPOUT 060469-YYY150A (1.5 GPM) SPOUT 066070-YYY0A (2.2 GPM) AERATOR 042692-0070A PORCELAIN CROSS HANDLE M922881-YYY0A (1.