Specification Sheet

A5
© 2013 AS America Inc.
PEKOE
™
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-DOWN SPRAY
MODEL NUMBER:
4332.300 Pull Down Faucet
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise valve
control and a lifetime of drip-free, maintenance-free performance.
Brass Construction: Highest quality materials for durability
&
long life.
Memory Position Valving: Allows user to turn valve on
and
off at preferred temperature setting without readjusting
handle
position each time.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average
Pull-down Spray: Adjustable spray pattern-stream to spray.
Integral Check Valves: Prevents back flow.
Choice of Finishes: Choice of Polished Chrome or
Stainless
Steel (PVD).
SUGGESTED SPECIFICATION:
Single control kitchen faucet shall feature a forged brass body with pull-down spray. Shall also feature washerless ceramic disc
valve cartridge, flexible supply hoses and two integral check valves. Fitting shall be American Standard Model # 4332.300.____
4332.300
Pull-down Kitchen Faucet.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9 & Annex G
CSA B125
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
Product
Number
Description
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
GENERAL DESCRIPTION:
Forged brass body with brass swivel spout (150˚ rotation) and
metal lever handle. Pull-down spray with adjustable spray
pattern and push button activation. Metal reinforced hose.
Washerless 40mm ceramic disc valve cartridge. Complete with
two integral check valves. Braided flexible supply hoses with 3/8"
compression connectors. 2.2 gpm/8.3Lmin. maximum flow rate.
395mm
(15-1/2")
154mm
(6")
208mm
(8-1/4")
201mm
(8")
733mm
(28-3/4")
400mm
(15-3/4")
33 to 38mm
(1-3/8" to 1- 1/2")
DIA. MOUNTING HOLE
51mm
(2")
Revised 5/12