Specification Sheet

A67
© 2010 AS America Inc.
COLONY SOFT
TWO-HANDLE KITCHEN FAUCET
WITH BRASS GOOSENECK SPOUT
4275.551 Shown
MODEL NUMBER:
4275.550 Kitchen Faucet
Lever Handles. Less Handspray.
4275.551 Kitchen Faucet
Lever Handles. Separate Color-Matched Handspray.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Cast Brass Waterways with “City Shanks”: Strong and
durable. Integral tabs on casting provide a wobble-free
installation.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
Simple Installation: Fast and easy one person
installation. Faucet drops in from top. Quick spin nuts secure
faucet in place.
4275.550
Product
Number
Description
Finish Options
4275.551
PVD
Satin
Nickel
295
Polished
Chrome
002
Kitchen faucet. Lever handles. Less Handspray.
Kitchen faucet. Lever handles. Separate Color-Matched Handspray.
GENERAL DESCRIPTION:
Durable brass construction. 1/4 turn washerless ceramic
disc valve cartridges. Durable cast brass waterway with 1/2"
male inlet shanks. Brass gooseneck swivel spout and lever
handles. Metal escutcheon plate (escutcheon size 10-5/16"L
x 2-3/8"W). 2.2gpm/8.3L/min. maximum flow rate.
SUGGESTED SPECIFICATION:
Two handle kitchen faucet shall feature brass construction with all brass inlet shanks and coupling nuts. Brass gooseneck
swivel spout. Shall also feature 1/4 turn washerless ceramic disc valve cartridges that are reversible for use on either "hot" or
"cold" side. Faucet shall be American Standard Model #4275.5___.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
203mm
(8")
262mm
(10-5/16")
35mm to 38mm
(1-3/8" to 1-1/2")
DIA. MOUNTING
HOLE (4 PLACES)
21mm
(13/16")
25mm
(1")MAX.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9 & Annex G
ANSI A117.1
74mm
(2-7/8")
189 mm
(7-1/2")
305 mm
(12")
195 mm
(7-3/4")
54mm
(2-1/8") MAX.
21mm
(13/16" D.)
51mm
(2" D.)
130mm
(5-1/8")
Revised 4/10