Use and Care Guide

NEO CORNER SHOWER BASE
Product Features:
• Acrylic with fiberglass reinforcement
• Corner neo-angle unit
• Textured bottom pattern
• Integral two-sided, double tiling edge
with water retention flange
• Molded-in flood guard
• PVC shower drain with stainless steel
drain plate
❏ 4242.NEO CORNER SHOWER BASE
Nominal Dimensions: 1073 x 1070 x 168mm
(42-1/4" x 42-1/8" x 6-5/8")
❏ 3838.NEO CORNER SHOWER BASE
Nominal Dimensions: 968 x 967 x 168mm
(38-1/8" x 38-1/16" x 6-5/8")
❏ 3636.NEO CORNER SHOWER BASE
Nominal Dimensions: 921 x 918 x 168mm
(36-1/4" x 36-1/8" x 6-5/8")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ANSI Z124.2 for Plastic Showers
• ASTM E162 for Surface Flammability
• NFPA 258 for Smoke Density
NEO CORNER SHOWER BASE
HIGH GLOSS ACRYLIC
© 2002 American Standard Inc.
BV-043
Revised 3/02
SPS 4242./3838./3636.NEO
To Be Specified - Required:
❏ Color: (specify American Standard
fixture color)
To Be Specified - Optional:
❏ Metal Drain Plate in Polished Brass or Satin
(751819-099)
❏ Satin (751819-295)
NOTES: REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH SHOWER
BASE FOR ADDITIONAL INFORMATION.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of
tolerances established by ANSI Standard Z124.1 / CSA. These measurements are
subject to change or cancellation.
No responsibility is assumed for use of superseded or voided pages.
See reverse side for roughing-in dimensions