Specification

A21
© 2014 AS America Inc.
ARCH
™
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-OUT SPRAY
MODEL NUMBER:
4101.100 Kitchen Faucet with Pull-Out Spray
4101.100.F15 Kitchen Faucet with Pull-Out Spray
SUGGESTED SPECIFICATION:
Single control kitchen faucet shall feature swivel pull-out spray with toggle button activation, metal escutcheon plate and metal
lever handle. Shall also feature washerless ceramic disc valve cartridge, flexible hose supplies and two integral check valves.
Fitting shall be American Standard Model # 4101.001.___.___.
GENERAL DESCRIPTION:
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Memory Position Valving: Allows user to turn valve on and
off at preferred temperature setting without readjusting handle
position each time.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
Integral Check Valves: Prevents back flow.
Pull-out Spray: With toggle button activation. Switches water
flow from stream to spray.
Choice of Finishes: Available in Polished Chrome or
Stainless Steel (PVD) finishes.
288mm
(11-5/8")
149mm
(5-7/8")
58mm
(2-5/16")
54mm
(2-3/16")
261mm
(10-5/16")
35 to 38mm
(1-3/8" to 1-1/2")
DIA. MOUNTING HOLE
Pull-Out Kitchen Faucet - 2.2 gpm/8.3 L/min. maximum flow rate
4101.100
Pull-Out Kitchen Faucet - 1. 5 gpm/5.7 L/min. maximum flow rate
4101.100.F15
Optional Soap Dish. Can be mounted anywhere on counter.
(hardware provided)
4101.115
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9 & Annex G
CSA B125
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
Product
Number
Description
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Metal swivel spout (130˚ rotation). Metal escutcheon plate and
metal lever handle. Pull-out spray with adjustable spray
pattern and toggle button activation. Nylon reinforced hose is
48" (1250mm) long. Washerless 40mm ceramic disc valve
cartridge. Braided flexible supply hoses with 3/8" compression
connections. Brass mounting shank with brass fixation ring.
2.2 gpm/8.3 L/min. maximum flow rate, 1.5 gpm/5.7 L/min,
maximum flow rate for F15 models. Can be mounted with
or without supplied escutcheon plate (escutcheon size
10-5/16"L x 2-5/16"W).
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
1. 5 gpm/5.7 L/min. FLOW RATE
2.2 gpm/8.3 L/min. FLOW RATE
Revised 3/14