Dimensions Guide

A25
© 2008 AS America Inc.
ARCH™
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-OUT SPRAY
MODEL NUMBER:
4101.350 Kitchen Faucet with Pull-Out Spray
4101.351 Kitchen Faucet with Pull-Out Spray
With deck plate and removable soap dish.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise valve
control and a lifetime of drip-free, maintenance-free performance.
Brass Construction:
Highest quality materials for durability &
long life.
Memory Position Valving: Allows user to turn valve on and
off at preferred temperature setting without readjusting handle
position each time.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Pull-out Spray: With toggle button activation. Adjustable spray
patterns - stream to spray.
Integral Check Valves: Prevents back flow.
Choice of Finishes:
Available in Polished Chrome or Stainless
Steel (PVD).
SUGGESTED SPECIFICATION:
Single control kitchen faucet shall feature a brass swivel spout, metal lever handle and a pull-out spray with toggle button
activation. Shall also feature washerless ceramic disc valve cartridge, flexible supply hoses and two integral check valves.
Fitting shall be American Standard Model # 4101.35__._____
4101.350
Hi flow Pull-out kitchen faucet
4101.351
Same as above with escutcheon plate and removable soap dish
GENERAL DESCRIPTION:
Brass body with brass swivel spout. Pull-out spray spout with
adjustable spray pattern and toggle button activation. Nylon
reinforced hose is 1250mm - 48 inches long. Washerless
40mm ceramic disc valve cartridge. Braided flexible supply
hoses with 3/8" compression connections. 2.2 gpm/8.3L/min.
maximum flow rate.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B125
NSF 61 / Section 9
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
Product
Number
Description
Finish Options
075
Polished
Chrome
002
PVD
Stainless
Steel
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
4101.3514101.350
533mm
(21)
267.7mm
(10-1/2 )
141.4mm
(5-9/16 )
224.4mm
( 8-13/16 )
290.4mm
(11-7/16)
242.6mm
(9-9/16)
242.7mm
( 9-9/16 )
331.2mm
(13-1/16)
53.8mm
(2-3/16)
51mm
(2)
35 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING HOLE
Revised 4/09