Use and Care Guide

H135
© 2008 AS America Inc.
Revised 3/02
NEO CORNER SHOWER BASE
Product Features:
• Acrylic with berglass reinforcement
• Corner neo-angle unit
• Textured bottom pattern
• Integral two-sided, double tiling edge
with water retention ange
• Molded-in ood guard
• PVC shower drain with stainless steel
drain plate
❏ 4242.NEO CORNER SHOWER BASE
Nominal Dimensions:
1073 x 1070 x 168mm
(42-1/4" x 42-1/8" x 6-5/8")
❏ 3838.NEO CORNER SHOWER BASE
Nominal Dimensions:
968 x 967 x 168mm
(38-1/8" x 38-1/16" x 6-5/8")
❏ 3636.NEO CORNER SHOWER BASE
Nominal Dimensions:
921 x 918 x 168mm
(36-1/4" x 36-1/8" x 6-5/8")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ANSI Z124.2 for Plastic Showers
• ASTM E162 for Surface Flammability
• NFPA 258 for Smoke Density
To Be Specied - Required:
❏ Color: (specify American Standard xture color)
To Be Specied - Optional:
❏ Metal Drain Plate:
 ❏ 751819-099 in Polished Brass
or
 ❏ 751819-295 in Satin Nickel
NEO CORNER
SHOWER BASE
HIGH GLOSS ACRYLIC
NOTES:
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH SHOWER
BASE FOR ADDITIONAL INFORMATION.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard Z124.1 / CSA. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS