Installation Guide

ManualsBrandsAmerican Standard ManualsBathTown Square S Right Height Elongated Toilet Bowl Only in Linen

SAVE FOR FUTURE USE

7302354-100 Rev. A 4/18

Product names listed herein are trademarks of AS America, Inc.

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly define contour of china and components.

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed

properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be

sure your installation conforms to local codes.

Water Supply Line

EZ-INSTALL KIT INCLUDED WITH TANK

4216.228 LEFT HAND TANK / 4216.823 RIGHT HAND TANK

BOWL 3271.101 RIGHT HEIGHT

ELONGATED

SOLD SEPARATELY

EZ-INSTALL KIT INCLUDED WITH BOWL

TOWN SQUARE

1.28 gpf / 4.8 Lpf 2-piece Toilet

Wax Ring

T-Bolts with

Retainer (2)

Bowl-To-Floor

Knobs (2)

Tank To Bowl

Gasket

Metallic (Brass)

Tank Nuts (2)

Plastic

Coupling Nut (1)

Coupling

Washer (1)

Attachment

Handle

Bolt Caps (2)

Toilet Seat

BEFORE INSTALLING YOUR TOILET: please see your product spec page to verify the dimensions and water supply connections.

Visit our website where you can search by Model number for the product spec page at: http://www.americanstandard-us.com/

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE TOWN SQUARE® S 1.28 gpf / 4.8 Lpf 2-piece Toilet Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes. ! CAUTION: PRODUCT IS FRAGILE.
PAGE 2
Before You Start: If Removing An Existing Toilet Clean Flange Turn Off Water Supply Flush to remove water from tank; sponge remaining water from bowl before removing toilet. ! Caution: If leaving floor flange open for more than 1-2 hours, cover flange to prevent escaping sewer gases. BACK-TO-BACK INSTALLATION Recommended fitting type for back-to-back installations.
PAGE 3
7 8 Before tightening tank down onto bowl, connect water supply line. (Water supply line sold separately.) Hand tighten nut. Place tank washers and nut over tank bolts. Tighten handles alternately until the tank contacts the front and back of the bowl achieving china-to-china contact. NOTE: To ease installation, push down on the top of the tank while tightening handles. 9 ! Turn On Water Supply 10a WARNING: Overtightening of water supply line nuts could result in breakage and potential flooding.
PAGE 4
11 Water Level Adjustment Knob Refill Tube Trip Lever Rod A Adjust water level to level indicated on tank by turning water level adjustment knob to move float cup up or down. Approximate Water Level Float Cup B Flush Valve Chain Fill Valve Or Water Control If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the bead chain from the retainment clip and take up slack on the chain, and reinsert on lift rod. Make sure the chain is not too taught.