Specification Sheet

ManualsBrandsAmerican Standard ManualsKitchen ApplianceColony Soft 2-Handle Bar Faucet in Polished Chrome

A71

COLONY SOFT

TWO-HANDLE CENTERSET BAR SINK FAUCET

WITH BRASS GOOSENECK SPOUT

GENERAL DESCRIPTION:

Durable brass construction. 1/4 turn washerless ceramic

disc valve cartridges. One-half inch male inlet shanks

with brass coupling nuts. Brass gooseneck swivel spout.

2.2gpm/8.3L/min. maximum flow rate.

PRODUCT FEATURES:

Ceramic Disc Valve Cartridges: Assures a lifetime of

drip-free performance.

Solid Brass Construction: Durable. Ideal for prolonged

contact with water.

Lead Free: Faucet contains ≤ 0.25% total lead content by

weighted average.

Choice of Finishes: Available in Polished Chrome or Satin

Nickel (PVD).

MODEL NUMBER:

2475.500 Centerset Bar Sink Faucet

Lever handles.

SUGGESTED SPECIFICATION:

Centerset bar sink faucet shall feature brass construction with brass inlet shanks and brass coupling nuts. Shall also feature

1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model # 2475.500.___.

2475.500

Product

Number

Description

Bar Sink faucet. Lever handles.

Finish Options

PVD

Satin

Nickel

295

Polished

Chrome

002

Meets the American Disabilities Act Guidelines

and ANSI A117.1 Requirements for the

physically challenged.

127mm

(5")

181mm

(7-1/8")

332mm

(13-1/16")

74mm

(2-7/8")

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S S U R E ( P S I )

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

2.5

3.0

10080604020

CODES AND STANDARDS

These products meet or exceed the following

codes and standards:

ANSI A117.1

ASME A112.18.1

CSA B 125

NSF 61/Section 9 & Annex G

30mm

(1-1/4)

35mm - 38mm

(1-3/8" to 1-1/2")

DIA. MOUNTING

HOLES (2)

25.4mm

(1-1/16")

1/2"

NPSM

Revised 3/10

Summary of content (2 pages)

PAGE 1
COLONY SOFT TWO-HANDLE CENTERSET BAR SINK FAUCET WITH BRASS GOOSENECK SPOUT MODEL NUMBER: 2475.500 Centerset Bar Sink Faucet Lever handles. 332mm (13-1/16") 127mm (5") 74mm (2-7/8") 181mm (7-1/8") 1/2" NPSM 35mm - 38mm (1-3/8" to 1-1/2") DIA. MOUNTING HOLES (2) 25.4mm (1-1/16") 30mm (1-1/4) GENERAL DESCRIPTION: PRODUCT FEATURES: Durable brass construction. 1/4 turn washerless ceramic disc valve cartridges. One-half inch male inlet shanks with brass coupling nuts. Brass gooseneck swivel spout. 2.
PAGE 2
COLONY SOFT TWO-HANDLE CENTERSET BAR SINK FAUCET WITH BRASS GOOSENECK SPOUT CODES AND STANDARDS FLOW RATE* GALLONS PER MINUTE These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9 & Annex G 3.0 2.5 2.0 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number 2475.500 Polished Chrome Description 002 PVD Satin Nickel 295 Bar Sink faucet. Lever handles.