Use and Care Guide

H133
© 2012 AS America Inc.
To Be Specied:
Color:
Bath Filler: (specify nish)
Bath Drain: (included)
To Be Specied - Optional:
Pressure Test Kit
: 791363-0070A for integral
overow models only
PRINCETON
RECESS BATH
AMERICAST
®
BRAND ENGINEERED MATERIAL
Revised 8/12
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
Americast
®
brand engineered material is a composition of porcelain bonded
to enameling grade metal, bonded to a patented structural composite.
Photograph details integral overow and drain
assembly. Drain assembly included with bath.
With Integral Overow
*See faucet section for additional models available
When system pressure test is required, the pressure test kit is
necessary to seal overow and perform test.
PRINCETON™ RECESS BATH
Americast
®
brand engineered material
• Acid resistant porcelain nish
• Recess bath with integral apron and tiling ange
• Integral lumbar support
• Beveled headrest
• Full slip-resistant coverage
• End drain outlet
• Integral base
2390.202 Left Hand Outlet
2390.202TC Same as above with Tub Cover
2391.202 Right Hand Outlet
2391.202TC Same as above with Tub Cover
With Integral Overow
• Lift and turn drain stopper assembly included
with bath
• Escutcheon included and installed on bath
2390.202 ICH (Chrome Trim) Left Hand Outlet
2390.202 ICHTC Same as above with Tub Cover
2391.202 ICH (Chrome Trim) Right Hand Outlet
2391.202 ICHTC Same as above with Tub Cover
For Above Floor Rough Installation
2392.202 Left Hand Outlet for above
oor installation
2392.202TC Same as above with Tub Cover
2393.202 Right Hand Outlet for above
oor installation
2393.202TC Same as above with Tub Cover
Nominal Dimensions:
1524 x 762 x 356mm
(60" x 30" x 14")
Above Floor Rough Dimensions:
1524 x 762 x 445mm
(60" x 30" x 17-1/2")
Bathing Well Dimensions:
1423 x 635 x 337mm
(56" x 25" x 13-1/4")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4 for Americast Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ANSI Z124.1 Ignition Test
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
BARRIER FREE
© 2012 AS America Inc.

Summary of content (2 pages)