Specification

K2-216
© 2017 AS America Inc.
spec_238AA.104 VorMax HET RHel Rev. A 6/17
VORMAX
®
HET
RIGHT HEIGHT
®
ELONGATED TOILET
VITREOUS CHINA
VORMAX
®
HET RIGHT HEIGHT
®
ELONGATED TOILET
238AA .104
VorMax ushing technology cleans two times better
than conventional toilets**
• Combination bowl and tank, less seat
• 12" (305 mm) rough-in
• Right Height elongated siphon action bowl
• High efficiency toilet (HET) 1.28 gpf/4.8 Lpf
• Meets EPA WaterSense
®
criteria
• EverClean
®
Antimicrobial Surface
• Transitional styling
Includes EZ-Install tools
• CleanCurve
rim eliminates rim area where dirt and
build-up hide
• 16-1/2" (419 mm) rim height for accessible applications
• 2-1/16" (52 mm) trapway
• Dual injection ush valves
• Chrome trip lever
• Two color-matched bolt caps
• 10 year warranty
Best 1,000g MaP Flush Score**
238AA .105 Same as above except trip lever
on right hand side
3385A.101 Right Height
®
Elongated Bowl
4385A.104 HET Tank
Nominal Dimensions:
30-3/16" x 17-7/8" x 32-1/4"
(767 x 453 x 820mm)
Fixture only, seat and supply sold separately
Alternative Tank Conguration Available:
4385A.105 Tank complete with trip lever
located on right side
Compliance Certications -
Meets or Exceeds the Following Specications:
ASME A112.19.2/CSA B45.1 for Vitreous
China Fixtures
• US EPA WaterSense
®
Specication for HETs
To Be Specied:
Color: White Bone Linen
Seat: #5055A.65C Elongated Slow Close solid plastic
seat and cover
Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES A
CT GUIDELINES
AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
BARRIER FREE
30-3/16"
(767mm)
18-1/2"
(470mm)
16-1/2"
(419mm)
17-7/8"
(453mm)
32-1/4"
(820mm)
11-3/16"
(284mm)
14"
(355mm)
* 8"
(203mm)
11/16"
(18mm)
9"
(227mm)
2-11/16"
(68mm)
12"
(305mm)
9-3/16"
(233mm)
14-13/16"
(377mm)
4"
(100mm)
FINISHED
WALL
FINISHED
FLOOR
SUPPLY AS
REQUIRED
* 6"
(152mm)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPAR AT ELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Source: Test Report No. 109-141486-002, comparing VorMax against
conventional under-the-rim-water-dispersal toilets from major retailers.
**
Certified by
IAPMO R&T

Summary of content (1 pages)