Technical Specifications

K41
© 2013 AS America Inc.
COLONY
®
RIGHT HEIGHT
®
ELONGATED
10" ROUGH TOILET
❏ 221AB.104
•Vitreouschina
•HighEfficiencyToilet(HET),ultra-low 
 consumption(4.8Lpf/1.28gpf),utilizes20%
 lesswater
•MeetsEPAWaterSense
®
criteria
•PowerWash
®
rimscrubsbowlwitheachush
•Includescolormatchbowlcaps
•2"ushvalve
•2"trapway
•16-1/2"rimheightforaccessibleapplications
•10"(254mm)rough-in
•Generous9"x8"watersurfacearea
•Colormatchedtripleverissupplied
•2yearwarranty
❏ 3251A.101RightHeight
®
ElongatedBowl
❏ 4192B.104Tank
Nominal Dimensions:
706x474x788mm
(27-13/16"x18-11/16"x31")
Fixtureonly,seatandsupplysoldseparately
Alternative Tank Conguration Available:
❏ 4192B.105Tankcompletewithtriplever 
locatedonrightside
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
•USEPAWaterSense
®
SpecicationforHETs
10/13
COLONY
®
RIGHT HEIGHT
®
ELONGATED 10" ROUGH TOILET
VITREOUS CHINA
FINISHED WALL
13mm
(1/2")
419mm
(16-1/2")
FINISHED
FLOOR
255mm
(10")
706mm
(27-13/16")
C/L OF OUTLET
67mm
(2-5/8")
173mm
(6-13/16)
470mm
(18-1/2")
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
340mm
(13-3/8")
181mm
(7-1/8")
788mm
(31")
474mm
(18-11/16")
SUPPLY
AS
REQ'D
248mm
(9-3/4")
254mm
(10")
356mm
(14")
*
152mm
(6")
*
BARRIER FREE
To Be Specied:
❏Color:❏White❏Bone❏Linen
❏Seat:AmericanStandard#5324.019"Riseand
Shine"solidplasticclosedfrontelongatedseat
withcover
❏Supplywithstop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
254MM(10")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithintherangeof
tolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
Certified by
IAPMO R&T