Specification Sheet

K161
© 2012 AS America Inc.
1/12
CADET
®
PRO
™
RIGHT HEIGHT
®
ELONGATED TOILET 10" ROUGH-IN
❑ 215AB.104
•FeaturestheCadet
®
Flushing System
•Vitreouschina
•HighEfficiencyToilet(HET),ultra-low 
 consumption(4.8Lpf/1.28gpf),utilizes20%
 lesswater
•MeetsEPAWaterSense
®
criteria(pending)
•Tradeexclusivetank
•PowerWash
®
rimscrubsbowlwitheachush
•Robustmetaltriplever&metalshankllvalve
•IncludesEZ-InstallToolsw/colormatchbowlcaps
•EverClean
®
surfaceincluded
•Oversized3"ushvalve
•Fully-glazed2-1/8"trapway
•16-1/2"rimheightforaccessibleapplications
•10"(254mm)rough-in
•Generous9"x8"watersurfacearea
•Chromenishtripleverissupplied
•1,000gMaPScore**at1.28gpf
•5yearwarranty
❑ 3517A.101RightHeight
®
ElongatedBowl
❑ 4188B.104Tank
Nominal Dimensions:
717x460x771mm(28-1/4"x18-1/8"x30-3/8")
Fixtureonly,seatandsupplysoldseparately
Alternative Tank Conguration Available:
❑ 4188B.105Tankcompletewithtripleverlocated
onrightside
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
•USEPAWaterSense
®
SpecicationforHETs
CADET
®
PRO
™
RIGHT HEIGHT
®
ELONGATED TOILET 10" ROUGH
VITREOUS CHINA
To Be Specied:
❏Color:❏White❏Bone❏Linen
❏Seat:#5321.110EverClean
®
ElongatedSeatwith
SlowCloseSnap-OffHinges
❏Supplywithstop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Certified by
IAPMO R&T
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
254MM(10")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithintherangeof
tolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
5/8" (16mm)
3-5/8" (92mm)
SUPPLY
AS
REQ'D
C/L OF OUTLET
6"
(152mm)
*10"
(254mm)
FINISHED WALL
FINISHED
FLOOR
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
7-7/16"
(188mm)
13-5/8"
(347mm)
7-11/16"
(195mm)
28-1/4"
(717mm)
18-1/2"
(470mm)
16-1/2"
(419mm)
30-3/8"
(771mm)
9-5/8"
(244mm)
14"
(356mm)
18-1/8"
(460mm)
10"
(254mm)
BARRIER FREE
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.