Specifications

ManualsBrandsAmerican Standard ManualsBathroom Remodel & Bathroom FixturesChampion 1.28 GPF Water Efficient Round Two-Piece Toilet (Seat Not Included)

K97

2/14

PORTSMOUTH

CHAMPION

PRO

RIGHT HEIGHT

ROUND FRONT TOILET

❑ 213BA.104

• Features Champion® Flushing System

• Vitreous china

• High Efficiency Toilet (HET), ultra-low

consumption (1.28 gpf/4.8 Lpf), utilizes

20% less water

• Meets EPA WaterSense

Criteria

• Trade exclusive tank

• PowerWash

rim scrubs bowl with each ush

• Robust metal trip lever & metal shank ll valve

• Includes EZ-Install tools w/color match bowl caps

• EverClean

Surface included

• 4" piston-action Accelerator™ ush valve

• Fully-glazed 2-3/8" trapway

• 16-1/2" rim height for accessible applications

• 12" (305mm) rough-in

• Generous 9" x 8" water surface area

• Chrome nish trip lever is supplied

• 1,000g MaP Score** at 1.28gpf

• 10 year warranty

• Coordinates with Portsmouth Suite

❑ 3195B.101 Right Height

Round Front Bowl

❑ 4327A.104 Tank

Nominal Dimensions:

718 x 423 x 790mm (28-1/4" x 16-5/8" x 31-1/8")

Fixture only, seat and supply sold separately

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous

China Fixtures

• US EPA WaterSense

Specication for HETs

PORTSMOUTH

CHAMPION

PRO

RIGHT HEIGHT

ROUND FRONT TOILET

VITREOUS CHINA

FINISHED

FLOOR

FINISHED WALL

16-1/2"

(419 mm)

12"

(305 mm)

9-3/8"

(238 mm)

13-7/16"

(341 mm)

16-1/2"

(419 mm)

31-1/8"

(790 mm)

10-9/16"

(268 mm)

14"

(356 mm)

16-5/8"

(423mm)

28-1/4"

(718 mm)

8-7/8"

(226 mm)

(26 mm)

3-9/16"

(90 mm)

2-1/16"

(52 mm)

BARRIER FREE

To Be Specied:

❏ Color: ❏ White ❏ Linen

❏ Seat: #5330.010 Round Front Champion

Slow Close

solid plastic seat and cover

❏ Supply with stop:

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE

BUILDING FACILITIES-CHECK LOCAL CODES.

Certiﬁed by

IAPMO R&T

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPAR ATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

** Maximum Performance (MaP) testing performed by

IAPMO R&T Lab. MaP Report conducted by Veritec

Consulting, Inc. and Koeller and Company.