Installation Guide

ManualsBrandsAmerican Standard ManualsShower FaucetsAmerican Standard 1.5 GPM Single Function Shower Head

Installation

Instructions

Certiﬁed to comply with ANSI A112.18.1

Recommended Tools & Materials

ROUGHING-IN DIMENSIONS

Thank you for selecting American-Standard...the benchmark

of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

M 9 6 5 2 4 0 R E V. 1. 1

Electric Drill

3mm (1/8")

Drill Bit

Pencil

Teflon tape

Phillips Screwdriver

FINISHED FLOOR

Hammer

COMMERCIAL WALL

MOUNTED SHOWERHEAD

1660.243

1660.244

74mm

(2-7/8")

90mm

(3-1/2")

57mm

(2-1/4")

7.2 mm

(5/16") DIA.

HOLES

37mm

(1-7/16")

37mm

(1-7/16")

54mm

(2-1/8")

65mm

(2-9/16")

37mm

(1-7/16")

1/2-14 NPT

17mm

(11/16")

13mm

(1/2")

OPTIONAL TO FINISHED

FLOOR USUALLY

BETWEEN 65'' AND 80''

(1651 and 2032mm)'

CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH

WITH A COARSE SURFACE.

3/32" Hex Wrench

Summary of content (3 pages)

PAGE 1
Installation Instructions COMMERCIAL WALL MOUNTED SHOWERHEAD 1660.243 1660.244 Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1 M 9 6 5 2 4 0 R E V. 1.
PAGE 2
1 INSTALL SHOWER HEAD CAUTION Turn off hot and cold water supplies before beginning. Thread SHOWER HEAD (1) hand tight onto SUPPLY NIPPLE (2). FIG. 1. Level SHOWER HEAD (1). Mark the location of the three mounting holes. Remove SHOWER HEAD (1). FIG. 2. Drill three 1/8" diameter holes a minimum of 1-1/4" deep. With a hammer tap the three ANCHORS (3) (not supplied) flush with face of the finished wall. FIG. 3. Apply TEFLON TAPE (4) to SUPPLY NIPPLE (2). FIG. 4.
PAGE 3
COMMERCIAL WALL MOUNTED SHOWERHEAD MODEL NUMBER 1660.243 1660.244 M964243-0070A FLOW REGULATOR 2.0 gpm, (7.6L/min.) M923208-0070A FLOW REGULATOR 1.5 gpm, (5.7L/min.) Appropriate finish code CHROME 002 HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1-800 442-1902 Weekdays 8:00 a.m. to 8:00 p.m. EST IN MEXICO 01-800-839-1200 IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093) Weekdays 8:00 a.m. to 7:00 p.m.