Installation Guide

ManualsBrandsAmerican Standard ManualsDrain PartsTown Square S Freestanding Tub Overflow Cover and Drain Kit in Legacy Bronze

All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.

Local building codes vary by location. Observe all local plumbing and building codes.

Your new bath is shipped to you after careful inspection.

To ensure maximum performance and pleasure from this product, please follow the instructions and cautions.

BEFORE YOU BEGIN....

ROUGH-IN INFORMATION: FREESTANDING TUB

Model 2546

SAVE FOR FUTURE USE

INSTALLATION INSTRUCTIONS

Thank you for selecting American Standard...the benchmark of fine quality for over 100 years. To ensure that your

installation proceeds smoothly--please read these instructions carefully before you begin.

755506-100

FREESTANDING TUB

HIGH GLOSS ACRYLIC SURFACE

NOTE: Take extra care in handling surfaces of the bath. Use only non-abrasive cloths to avoid scratching.

38-13/16"

(968 mm)

2-9/16"

(65 mm)

18-11/16"

(475 mm)

36"

(914 mm)

13/16"

(21 mm)

16-3/4"

(425 mm)

57-1/4"

(1454 mm)

68"

(1727 mm)

34"

(864 mm)

26-1/4"

(666 mm)

ø2-3/16"

(55 mm)

3-1/8"

(80 mm)

REMOVABLE ACCESS PANEL

3-1/8"

(80 mm)

2-1/4"

(57 mm)

9/16"

(14 mm)

2-1/4"

(57 mm)

19-3/8"

(492 mm)

24-7/16"

(620 mm)

68 x 36 x 24-7/16 in.

(1727 x 914 x 620mm)

163 Lbs. (74 Kg.)

782 Lbs. (355 Kg.)

74 Gal. (280L)

38-13/16 x 16-3/4 In. (986 x 425mm)

57-1/4 x 26-1/4 In. (1454 x 666mm)

17 In. (431mm)

46 Lbs./Sq.Ft. (225 Kgs./Sq.m)

GENERAL SPECIFICATIONS FOR

2546 FREE STANDING BATH

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

Town Square

S Model 2546

• Level

• Square

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Standard Woodworking Tools

• Personal Safety Equipment

• Caulking Gun

• Drill

• Hole Saw

• Silicone Caulking

• Tub & Tile Caulk

TOOLS:

TOOLS & MATERIALS REQUIRED

MATERIALS:

NOTE: Must purchase Drain Kit 1614.305.YYY which contains matched nish metal

overow cover and drain.

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FREESTANDING TUB HIGH GLOSS ACRYLIC SURFACE Town Square® S Model 2546 Thank you for selecting American Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. BEFORE YOU BEGIN.... Local building codes vary by location. Observe all local plumbing and building codes. Your new bath is shipped to you after careful inspection.
PAGE 2
NOTE: Tub water ﬁttings can be installed in one of 3 ways; Wall Mounted, Floor Mounted or Deck Mounted. Location of the access panel must be considered BEFORE installation of the tub. The tub access panel must be accessible if connecting deck mount fillers. Drain connection can be mounted through the access panel or through the floor. 1 INSTALLATION INSTRUCTIONS: Place the tub on a finished, level floor in the desired location. Using a marker, trace the outline of the tub drain hole onto the floor.
PAGE 3
5 Install drain per instructions provided with Drain Kit 1614.305.YYY. Drain Kit 1614.305.YYY purchased separately. 6 INSTALLING THE 1-1/2" (38mm) DIAMETER TAIL PIECE ASSEMBLY INTO P-TRAP 8" (203mm) tail piece included with Drain Kit 1614.305.YYY. A slip-joint nut and a flanged, 1-1/2" (38mm) diameter tail piece are recommended. (See Fig. 3) TAIL PIECE ASSEMBLY THREADED PORTION OF DRAIN BODY Slide the slip-joint nut over tail piece towards the flanged end as shown.
PAGE 4
POST INSTALLATION CLEAN-UP Remove all construction debris from bath. Do not use wire brushes or any other metal implement on bath surface. Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent. Stubborn dirt or stains may be removed using granular Spic and Span® mixed with water. Painter's naphtha can be used to remove excess adhesives and/or wet oil-base paint.