Installation Guide

ManualsBrandsAmerican Standard ManualsKitchenDeep Soak Drain

BATH WASTE AND OVERFLOW

WITH TOE TAPPER DRAIN PLUG

Installation

Instructions

1599.500.XXX

Thank you for selecting American-Standard...the benchmark

of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

U.S. Patent No. 4,294,289, Patents Pending

Plumbers' Putty or Caulking Phillips ScrewdriverChannel Locks

OVER THE RIM DRAIN

AND STANDARD DRAIN

LIFETIME UNIVERSAL DRAIN

ROUGH-IN DIMENSIONS

RECOMMENDED TOOLS

UNDER SIDE OF

OVERFLOW LEDGE

NOTE: OVERFLOW TUBE ASSEMBLY

ROTATED 90 DEGREES IN THIS VIEW.

STANDARD DRAIN OVER-THE-RIM DRAIN

1-1/2" OD

TAILPIECE

*NOTE: A smaller dimension can be accommodated by cutting pipe.

TOE TAPPER

DRAIN PLUG

ADJUSTABLE

MIN. 17"

MAX. 19-1/2"

ADJUSTABLE

MIN. 18"

MAX. 20-1/2"

ADJUSTABLE

MIN. 6-1/2

MAX. 9"

ADJUSTABLE

MIN. 6-1/2

MAX. 9"

2-13/16" DIA.

753995-100 Rev. C

DRAIN NUMBER BATH/WHIRLPOOL MODEL OVERFLOW TYPE

1599-500 2422L 5' X 32" OVER-THE-RIM

1599-500 2425L-RHO 5' X 32" IA-RHO OVER-THE-RIM

1599-500 2425L-LHO 5' X 32" IA-LHO OVER-THE-RIM

1599-500 2771L 5' X 36" OVER-THE-RIM

1599-500 7236L 6' X 36" OVER-THE-RIM

1599-500 6060L CORNER STANDARD

1599-500 2645L OVAL STANDARD

1599-500 2732 RENAISSANCE STANDARD

1599-500 2901L SAVONA STANDARD

1599-500 2908L REMINISCENCE STANDARD

1599-500 2711L ELLISSE STANDARD

1599-500 2773L CADET 6' X 36" STANDARD

1599-500 2774L CADET 6' X 42" STANDARD

1599-500 2775L CADET CORNER STANDARD

1-1/2" OD

TAILPIECE

TOE TAPPER

DRAIN PLUG

2-13/16" DIA.

Summary of content (5 pages)

PAGE 1
LIFETIME UNIVERSAL DRAIN OVER THE RIM DRAIN AND STANDARD DRAIN Installation Instructions 1599.500.XXX BATH WASTE AND OVERFLOW WITH TOE TAPPER DRAIN PLUG Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. U.S. Patent No. 4,294,289, Patents Pending 753995-100 Rev.
PAGE 2
1 INSTALL DRAIN PLUG AND ELL (STANDARD AND OVER-THE-RIM DRAINS) 1 Apply putty to underside of DRAIN PLUG (1) and drop into drain outlet. 2 Slip RUBBER WASHER (2) on from below and thread DRAIN PLUG (1) into DRAIN ELL ASSEMBLY (3). BATH DRAIN OUTLET 3 NOTE: TUB IS SHOWN CUT AWAY FOR CLARITY OF INSTALLATION. 2 PUTTY INSTALL OVERFLOW ASSEMBLY AND DRAIN TEE (OVER-THE-RIM DRAIN) Loosen SLIP JOINT NUT & SEAL (1) and install onto OVERFLOW TUBE (2).
PAGE 3
SECURE OVERFLOW ASSEMBLY TO TUB (OVER-THE-RIM DRAIN) 5 Install OVERFLOW GASKET (1) onto OVER FLOW FLANGE (2) using two strips of double-face tape (included). 4 SEALANT 1 2 3 Apply a bead of silicone sealant to upper edge of 0VERFLOW GASKET (1). Push OVER FLOW TUBE ASSEMBLY (3) up flush against underside of ledge. Install and align mounting holes in RETAINING PLATE (4) with holes in OVER FLOW FLANGE (2). Insert MOUNTING SCREWS (5) through RETAINING PLATE (4) into OVER FLOW FLANGE (2).
PAGE 4
5 ABOVE FLOOR OUTLET INSTALLATION (OVER-THE-RIM DRAIN) Note: Waste outlet can be installed either above the floor or below floor. Fig.1. For above floor drain outlet, Rotate DRAIN TEE ASSEMBLY (1) 90 degrees so TAILPIECE (2) faces out the back from tub as shown. TYPICAL ABOVE FLOOR INSTALLATION ROUGH FLOOR TUB 2 TUB ABOVE FLOOR ROUGH 1 BELOW FLOOR ROUGH NOTE: TUB IS SHOWN CUT AWAY FOR CLARITY OF INSTALLATION.
PAGE 5
LIFETIME UNIVERSAL DRAIN OVER THE RIM DRAIN AND STANDARD DRAIN PRODUCT NUMBER 1599.500.XXX 753744-0070A AM. STD.