Installation Instructions

ManualsBrandsAmerican Standard ManualsBathroom CleanersActiClean Toilet Cleaning Cartridge

OWNERS MANUAL

714AA / 214AA Series ActiClean

™

7302204-100 Rev. B 8/16 EN

Product names listed herein are trademarks of AS America, Inc.

THANK YOU

Keeping a clean and healthy home just got easier

with the American Standard ActiClean

™

toilet.

Introducing the ActiClean toilet, the first

self-cleaning toilet by American Standard. The

ActiClean self-cleaning toilet-bowl system makes

cleaning effortless. All it takes is one simple press

of a button to activate the cleaning system and in

minutes your bowl is sparkling clean.

ActiClean features two cleaning cycles, Deep

Clean and Quick Clean, and comes with a 9 week

supply of cleaning solution (based on a usage of

1 Quick Clean and 1 Deep Clean per week).

ActiClean does not require an electrical outlet; it

is powered by 4AA alkaline batteries (included)

which last up to 1 year.

In this document you will find information on how

to install and operate the ActiClean toilet,

frequently asked questions, and troubleshooting

guides. If you have any questions or need help

with installation or operation of your new toilet,

you can rest assured that our Customer Service

team is available to assist you.

To find out more about ActiClean technology or

follow an instructional video visit

www.americanstandard.com/Acticlean

At American Standard we continually work harder

to raise the standard of daily living by making it

easier, safer and more beautiful.

Summary of content (14 pages)

PAGE 1
OWNERS MANUAL 714AA / 214AA Series ActiClean™ THANK YOU Keeping a clean and healthy home just got easier with the American Standard ActiClean™ toilet. Introducing the ActiClean toilet, the first self-cleaning toilet by American Standard. The ActiClean self-cleaning toilet-bowl system makes cleaning effortless. All it takes is one simple press of a button to activate the cleaning system and in minutes your bowl is sparkling clean.
PAGE 2
TABLE OF CONTENTS If Removing An Existing Toilet................................................................................................................................... page 3 Back-to-Back Installation........................................................................................................................................... page 3 Inside The Box (or Boxes)..............................................................................................................................
PAGE 3
BEFORE INSTALLATION: ! Before installing your toilet, please see your product spec page to verify the dimensions and water supply connections. Visit our website where you can search by Model number for the product spec page at: http://www.americanstandard-us.com/ For further assistance please call Customer Care at: (800) 442-1902 IF REMOVING AN EXISTING TOILET Turn Off Water Supply Clean Flange Flush to remove water from tank; sponge remaining water from bowl before removing toilet.
PAGE 4
1 Flip the bowl upside down and press the wax ring down firmly . 2 Install T-Bolts onto the flange and screw the retaining nuts to hold into place. 4 3 Align the bowl and bolt holes to set into place. Apply weight evenly. ! Hand tighten only. Do not overtighten. Do not move after placement as water tight seal may break. BOLT CAP BOWL-TO-FLOOR KNOBS TIP: Place a piece of masking tape on the floor next to the bolts on both sides to help with alignment. 5 Remove all packaging.
PAGE 5
7 Secure tank to bowl with provided nuts using attachment handle supplied. Tighten nuts alternately until the tank contacts the front and back of the bowl achieving complete contact. ATTACHMENT HANDLE WITH NUT NOTES: a) To ease installation, push down on the top of the tank while tightening handles. b) Tighten all three bolts adequately. 8 VERIFY ADJUSTABLE SCREW SETUP (A) 1. Depress handle all the way (A). 2.
PAGE 6
9 A Connect water supply line. (Sold separately) Hand tighten nut. B Turn on water supply. Allow tank to fill. * For seat installation, see instructions included with seat. ! WARNING: Do not use plumber’s putty, pipe dope, or any other sealant on the water supply connection to this tank. If the connection leaks after hand tightening, replace the supply line. If the connection continues to leak with the new supply line, replace the inlet valve.
PAGE 7
11 REMOVE ORANGE TABS FROM LOCKING RETAINER POSTS Remove Tank Top from packaging and turn it upside down. Place on a clean countertop. On the underside of the Tank Top, locate the Orange Tabs (A) shown in diagram below. To remove Orange Tabs (A) carefully slide off of Locking Retainer Posts. (A) (A) (A) (A) LOCKING RETAINER POSTS WITH ORANGE TABS 12 Turn Tank Top right side up and place onto the tank. Make sure all excess packaging is removed prior to doing so.
PAGE 8
13 LOCK AND UNLOCK POSITIONS A. Open the lid. B. The tank Locking Knobs should be set to the UNLOCK position to properly seat the Tank Top in place. If they aren’t, turn them to UNLOCK position first. C. Then to lock the Tank Top in place, turn the Locking Knobs to the Lock position. This will ensure proper operation of the ActiClean cleaning cycles. UNLOCK (A) LOCK ! If access to the internal tank components is needed, first turn the Locking Knobs to the UNLOCK position.
PAGE 9
Control Panel Operation and Indicators Quick Clean 1 Minute Cycle Deep Clean 10 Minute Cycle Replace Batteries 4 AA Required Low Reminder Order Cartridge Cleaning Cycles Quick Clean Quick Clean is best used for regular upkeep, in between deep cleanings. A Quick Clean cycle will clean the inside of the toilet bowl in just one minute. We recommend using the quick clean cycle 1 time per week. Deep Clean Deep Clean is used for more thorough cleanings.
PAGE 10
How Does the ActiClean System Work? 1. Select the cleaning cycle that best suits your needs. 2. Cleaning Solution is Released - The cleaner travels through the designated channel in the tank and is mixed with water before entering the bowl. 3. VorMax Jetted Force - This powerful VorMax Jetted force allows the cleaner to scour the full circumference of the bowl, cleaning the entire surface from top to bottom, while exuding a fresh scent. 4.
PAGE 11
Frequently Asked Questions: Can I refill the toilet cleaning cartridge with other cleaning liquids? No. The ActiClean™ Toilet Cleaning Cartridge was specially formulated to work with the ActiClean system. Do not refill the cartridge with any other cleaners. Refilling the cartridge will void the warranty. Some chemicals could damage the parts inside of the tank, potentially causing a leak and the system to fail.
PAGE 12
ActiClean™ Unit Troubleshooting Guide PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION “Low” fluid light is illuminated even when cartridge is still full “Low” fluid light indicator has not been reset Follow the ActiClean™ System Instructions “To Install New Toilet Cleaning Cartridge” on page 9.
PAGE 13
Toilet Troubleshooting Guide See Step 8 and 10 For Diagram Problem Does not flush Poor or sluggish flush Possible Cause Corrective Action a. Water supply valve closed. b. Supply line blocked. c. Trip lever not opening red jet flapper to black frame stop. d. Sand or debris lodged in water control. a. Turn water supply on. Water should fill tank to level indicated in Step 10. b. Shut off water supply, disconnect supply line and inspect all gaskets and washers. Reassemble. c.
PAGE 14
ActiClean™ Toilet Limited Warranty This toilet comes with a limited lifetime warranty on chinaware, a limited 10 year warranty on all mechanical parts of the toilet, 1 year warranty on electronic parts and a limited 1 year warranty on the toilet seat if included with product. If inspection of this AS America, Inc.