Specification

ManualsBrandsAmerican Standard ManualsBathMetering Single Hole 2-Handle Low-Arc Bathroom Faucet in Polished Chrome

L39

Revised 3/14

METERING FAUCETS

CENTERSET SPOUT

1.0 GPM

GENERAL DESCRIPTION:

Metering centerset conventional spout faucet. Vandal-

resistant solid brass construction. Easy-push handles.

Water conserving, pressure compensating 1. 0 GPM

vandal-resistant aerator. Factory set for a maximum of

0.17 gallon flow per activation. Replaceable valve

cartridge. Adjustable flow cycle.

MODEL NUMBER:

1340.225 Cast centerset, 1.0 GPM pressure

compensating, vandal-resistant aerator

118mm

(4-5/8

54mm

(2-1/8

MOUNTING

SURFACE

38mm

(1-1/2

86mm

(3-3/8

57mm

(2-1/4

60mm

(2-3/8

154mm

102mm

46mm

(1-3/4

27mm

(1-1/16

FOR GROUND JOINT

OR 1-1/2" O.D. SLIP

CONNECTION

CODES AND STANDARDS

These products meet or exceed the following

codes and standards:

ANSI A117.1

ASME A112.18.1

CSA B 125

NSF 372

PRODUCT FEATURES:

• Pressure Compensating Aerator: Provides a constant

water flow of 1.0 gpm throughout the pressure range.

• Vandal-Resistant Brass Construction and Aerator:

Durable - Excellent in high use applications.

• Automatic Shut-off: Stops water and energy waste. Ideal for

public restrooms where uncontrolled water usage is costly.

• Meets ADA Standard: Requires less than 5 lbs. of operating

force to initiate flow per ANSI A117.1.

• Adjustable Flow Cycle

• Replaceable Valve Cartridge: Facilitates simple replacement.

• Hot/Cold Button Indicators

• Meets CALGreen

• Lead Free: Faucet contains ≤ 0.25% total lead content by

weighted average.

SUGGESTED SPECIFICATION

Metering faucet shall feature a vandal-resistant brass construction with a replaceable valve cartridge and an adjustable flow

cycle. Shall also feature a water-conserving pressure compensating 1.0 gpm/3.8L/min vandal-resistant aerator. Factory set to

maintain flow below the maximum 0.17 gallons per cycle required by ANSI A112.18.1M. Push button activator shall meet ANSI

A117.1 Standard. Fitting shall be American Standard Model # 1340.225.002

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USABLE BUILDING FACILITIES-CHECK LOCAL CODES

*PCA - Pressure Compensating

Other Aerators Available:

Part Suffix Description

V151.5 gpm (5.7 Lpm) PCA Vandal-Resistant Aerator

FLOW RATE*

FLOW RATE (GPM)

PRESSURE (PSI)

0.0

20 40 8060

0.2

0.4

0.6

0.8

1.0

Summary of content (2 pages)

PAGE 1
METERING FAUCETS CENTERSET SPOUT 1.0 GPM MODEL NUMBER: 1340.225 Cast centerset, 1.0 GPM pressure compensating, vandal-resistant aerator PRODUCT FEATURES: • Pressure Compensating Aerator: Provides a constant water flow of 1.0 gpm throughout the pressure range. • Vandal-Resistant Brass Construction and Aerator: GENERAL DESCRIPTION: Metering centerset conventional spout faucet. Vandalresistant solid brass construction. Easy-push handles. Water conserving, pressure compensating 1.
PAGE 2
METERING FAUCETS CENTERSET SPOUT CODES AND STANDARDS FLOW RATE* 1.0 FLOW RATE (GPM) These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 372 0.8 0.6 0.4 0.2 0.0 MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES 20 40 60 80 PRESSURE (PSI) Other Aerators Available: Part Suffix V15 Description 1.5 gpm (5.