Specification Sheet

ManualsBrandsAmerican Standard ManualsBathroom FaucetsAmerican Standard Pillar Tap Single Hole Metering Faucet

L33

Revised 6/11

METERING FAUCETS

PILLAR TAP FAUCET

GENERAL DESCRIPTION:

Metering pillar tap faucet. Vandal resistant solid brass

construction. Easy-push handle. Water conserving pressure

compensating 1.5 GPM aerator. Factory set for a maximum of

0.25 gallon flow per activation. Replaceable cartridge. Adjustable

flow cycle.

MODEL NUMBER:

1340.109 Cast spout, 1.5 GPM pressure compensating

vandal-resistant aerator

1340M.109 Same as above with mechanical mixing valve

OPTIONAL 4" or 8" Deck plates

605P.400 4" brass deck plate with 1/4" fixation studs

and quick spin nuts. (6-1/8" x 2-1/8" x 1/2")

605P.800 8" brass deck plate with 1/4" fixation studs

and quick spin nuts. (10-1/8" x 2-3/8" x 1/2")

130mm

(5-1/8")

78mm

(3-1/8")

51mm

(2")

138mm

(5-3/8")

26mm

(1-1/16")

52mm

(2")

3/8" COMPRESSION

MOUNTING

SURFACE

51mm

(2")

560mm

(22")

CODES AND STANDARDS

These products meet or exceed the following

codes and standards:

ANSI A117.1

ASME A112.18.1

CSA B 125

NSF 61/Section 9 and Annex G

PRODUCT FEATURES:

• Pressure Compensating Aerator: Provides a constant

water flow of 1.5 gpm throughout the pressure range.

• Vandal-Resistant Brass Construction and Aerator:

Durable - Excellent in high use applications.

• Automatic Shut-off: Stops water and energy waste. Ideal for

public restrooms where uncontrolled water usage is costly.

• Meets ADA Standard: Requires less than 5 lbs. of operating

force to initiate flow per ANSI A117.1.

• Single Supply: For cold or tempered water.

• Adjustable Flow Cycle

• Replaceable Valve Cartridge: Facilitates simple

replacement.

• Optional Mixing Valves: (sold separately)

• Mechanical (Model # 021943-0070A)

• Thermostatic (Model # 605XTMV)

• Flexible Supply Hose: With 3/8" Compression Connection

• Optional 4" or 8" Deck Plate

• Lead Free: Faucet contains ≤ 0.25% total lead content by

weighted average.

SUGGESTED SPECIFICATION

Metering faucet shall feature a single handle vandal-resistant brass construction with a replaceable valve cartridge and an

adjustable flow cycle. Shall also feature a water-conserving pressure compensating 1.5 gpm/5.7L/min vandal-resistant aerator.

Factory set to maintain flow below the maximum 0.25 gallons per cycle required by ANSI A112.18.1M. Push button activator

shall meet ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.109.002.

121mm

(4-3/4")

FLOW RATE*

VOLUME PER CYCLE (GAL)

PRESSURE (PSI)

0.00

20 40 8060

0.05

0.10

0.15

0.20

0.25

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USABLE BUILDING FACILITIES-CHECK LOCAL CODES

*PCA - Pressure Compensating

**Meets Cal Green Code

Other Aerators Available:

Part Suffix Description

V10**

V05

1.0 gpm (3.8 Lpm) PCA Vandal-Resistant Aerator

0.5 gpm (1.9 Lpm) PCA Vandal-Resistant Non-Aerated Spray

Summary of content (2 pages)

PAGE 1
METERING FAUCETS PILLAR TAP FAUCET MODEL NUMBER: 1340.109 Cast spout, 1.5 GPM pressure compensating vandal-resistant aerator 1340M.109 Same as above with mechanical mixing valve OPTIONAL 4" or 8" Deck plates 605P.400 4" brass deck plate with 1/4" fixation studs and quick spin nuts. (6-1/8" x 2-1/8" x 1/2") 605P.800 8" brass deck plate with 1/4" fixation studs and quick spin nuts. (10-1/8" x 2-3/8" x 1/2") 26mm (1-1/16") GENERAL DESCRIPTION: 138mm (5-3/8") Metering pillar tap faucet.
PAGE 2
METERING FAUCETS PILLAR TAP FAUCET CODES AND STANDARDS FLOW RATE* VOLUME PER CYCLE (GAL) These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9 and Annex G 0.25 0.20 0.15 0.10 0.05 0.00 MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES 20 40 60 80 PRESSURE (PSI) Other Aerators Available: Part Suffix V10** V05 Description 1.0 gpm (3.