Specification
J1
© 2019 AS America Inc.
BARRIER FREE
Town Square
®
S
Countertop Sink
Fireclay
Town Square
®
S Countertop Sink
• Self-rimming reclay drop-in sink
• Front overow
• Decorative rim detailing with tapered interior
bowl design
• Supplied with cut-out template
• Design coordinated to Town Square S suite
❏ 1203004 Faucet holes on 4" (203mm) centers
❏ 1203008 Faucet holes on 8" (102mm) centers
❏ 1203001 Center hole only
Nominal Dimensions:
24" x 19-1/16"
(609 mm x 484 mm)
Bowl sizes:
17-7/16" (443 mm) wide
11-7/8" (301 mm) front-to-back
5-1/2" (140 mm) deep
Compliance Certications -
Meets or Exceeds the Following
Specications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 series
To Be Specied:
❏ Color: ❏ White
❏ Town Square S Faucet*
❏ 1-1/4" Trap:
* See faucet section for models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPA R ATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
spec_120300X_TownSquareS Countertop-sink 6/19
SUPPLIES
AS REQ'D
1-1/4" O.D. WASTE
1-1/4" O.D. TAILPIECE
FINISHED
FLOOR
FINISHED
WALL
32-1/4"
(819mm)
SUGGESTED
7-1/2"
(191mm)
1-3/4"
(45mm)
24"
(609mm)
2-15/16"
(75mm)
9-5/8"
(244mm)
19-1/16"
(484mm)
8"
203mm
12-7/8"
327mm
10-3/4"
273mm
FAUCET MOUNTING HOLES:
SINGLE HOLE, 4"(102mm)
OR 8"(203mm)
BARRIER
FREE
CLEARANCE
COUNTER TOP
9" MIN
(229mm)
8" MIN
(203mm)
27" MIN
(686mm)
11" MIN
(279mm)
34" MAX
(864mm)
4"
(102mm)
25" MAX
(635mm)
6" MAX
(152mm)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.