Installation Instructions

ManualsBrandsAmerican Standard ManualsBathPortsmouth 8 in. Centers Pedestal/Vanity Top in White

ASSEMBLY & INSTALLATION INSTRUCTIONS

- 1 -

Recommended Tools & Materials

Roughing-in Dimensions

Product names listed herein are trademarks of AS America, Inc.

Hacksaw

Channel Locks

Adjustable Wrench

Tubing Cutter

Basin Wrench

Putty Knife

Tape

Measure

Plumbers’ Putty or

Caulking

Regular Screwdriver

Phillips Screwdriver

Drill

Level

Pipe Wrench

Portsmouth 24" Washstand

Model: 9210.224

770002-100 Rev.C

Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years.

To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.

Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.

To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading.

Also avoid extreme changes in temperature by arranging furniture away from radiators, heat and air vents,

and air conditioning units. Avoid placing furniture directly under windows.

22-1/2"

(570mm)

18"

(457mm)

33"

(838mm)

14-1/8"

(359mm)

16"

(406mm)

18"

(457mm)

PORTSMOUTH

SINK

SUPPLIES AS

REQUIRED

FINISHED

FLOOR

FINISHED

FLOOR

FINISHED

WALL

VANITY TOP

No top required for

Portsmouth Vanity Top (sink)

0555.104 Portsmouth Vanity Top (4" centers)

0555.108 Portsmouth Vanity Top (8" centers)

7005.201 Copeland Center Spread

7005.801 Copeland Wide Spread

RECOMMENDED SINKS RECOMMENDED FAUCETS

1-1/4" O.D.

WASTE

(203mm)

Summary of content (4 pages)

PAGE 1
ASSEMBLY & INSTALLATION INSTRUCTIONS Portsmouth 24" Washstand Model: 9210.224 VANITY TOP RECOMMENDED SINKS No top required for Portsmouth Vanity Top (sink) RECOMMENDED FAUCETS 0555.104 Portsmouth Vanity Top (4" centers) 7005.201 Copeland Center Spread 0555.108 Portsmouth Vanity Top (8" centers) 7005.801 Copeland Wide Spread Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years.
PAGE 2
WASHSTAND INSTALLATION Unpack unit carefully, taking care that bottom shelf does not drop and damage front legs (see Figure 2). Provide suitable reinforcement for anchoring the washstand to the wall. Centerline of reinforcement should be 27-3/4" up from the floor (see Figure 1). Rough in supply lines and waste per rough-in dimensions. The molding needs to be notched to seat the washstand flush against the wall. Move the washstand into place and level with the adjustable glides on the bottom of the feet.
PAGE 3
PORTSMOUTH VANITY TOP 0555.104/0555.108 INSTALLATION onto WASHSTAND… Two people recommended for this installation A Mount the drain assembly (not included) on the sink. Be certain to apply a bead of sealing putty on the underside of the drain (Part "A") in order to ensure a watertight seal between the sink and drain. Remove excess putty after installing the drain on the sink. Apply a bead of silicone adhesive to the rim of the vanity.
PAGE 4
AS AMERICA, INC. WOOD FURNITURE WARRANTY If inspection of this American-Standard plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American-Standard will repair or, at its option, exchange the product for a similar model. Variations in actual wood color and finishes which may result from natural characteristics of the wood, such as grain patterns, mineral streaks and the like, are not defects and are not covered by this warranty.