Specification

M29
© 2011 AS America Inc.
Revised 3/11
To Be Specied:
❏ Color: ❏ White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
❏ Concealed Arms Support (by others):
* See faucet section for additional models available
PENLYN
™
WALL-HUNG LAVATORY
VITREOUS CHINA
PENLYN™ WALL-HUNG LAVATORY
• Wall-hungsink
• Vitreouschina
• Frontoverow
• Integralbacksplash
• Faucetledge
  Shownwith4801.862AmarilisHeritage 
  faucetwithTriuneCrosshandles
(not included)
Faucet holes on 102mm (4") centers:
❏ 0373.027Forwallhanger(included)
❏ 0373.050 For concealed arms support
❏ 0373.950 For concealed arms support
  •Lessoverow
Nominal Dimensions:
457 x 403mm
(18"x15-7/8")
Bowl sizes:
340mm(13-3/8")wide
216mm(8-1/2")fronttoback
127mm (5") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2forVitreousChinaFixtures
NOTES:
*
DIMENSIONSSHOWNFORLOCATIONOFSUPPLIESAND“P”TRAP
ARESUGGESTED.
PROVIDESUITABLEREINFORCEMENTFORALLWALLSUPPORTS.
FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithin
therangeoftolerancesestablishedbyANSIStandardA112.19.2.These
measurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
102mm
(4")
403mm
(15-7/8")
88mm
(3-7/16")
178mm
(7")
457mm
(18")
C/L
FINISHED WALL
267mm
(10-1/2")
102mm
(4")
102mm
(4")
95mm
(3-3/4")
38mm
(1-1/2")
178mm
(7")
203mm
(8")
HOLES FOR ANCHOR
SCREWS IN BACK DRAPERY
787mm
(31")
*
502mm
(19-3/4")
*
460mm
(18-1/8")
SUPPLIES AS REQUIRED
1-1/4" O.D. TAILPIECE
1-1/4" O.D. WASTE
FINISHED FLOOR
175mm
(6-7/8")
HANGER
C/L OF
CONCEALED
ARM HOLES
381mm
(15")
54mm (2-1/8") DIA.
HOLES FOR
CONCEALED ARMS