Specifications

M65
© 2018 AS America Inc.
spec_0321 DeclynWallHungSink Rev 10/18
To Be Specied:
❏ Color: ❏ White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
❏ Concealed Arms Support (by others):
* See faucet section for additional models available
Declyn
™
Wall-Hung Lavatory
VITREOUS CHINA
Declyn
™
Wall-Hung Lavatory
• Wall-hungsink
• Vitreouschina
• Rearoverow
• Soapdepression
• Faucetledge
  Shownwith2000.101Ceramixfaucet
(not included)
❏ 0321.026Withwallhanger(Illustrated)
Faucet holes on 102mm (4") centers
❏ 0321.075 For concealed arms support
Faucet holes on 102mm (4") centers
Nominal Dimensions:
470x432mm
(18-1/2"x17")
Bowl sizes:
362mm(14-1/4")wide
273mm (10-3/4") front to back
152mm (6") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2/CSA45.1
NOTES:
*
DIMENSIONSSHOWNFORLOCATIONOFSUPPLIESAND“P”TRAP
ARESUGGESTED.
PROVIDESUITABLEREINFORCEMENTFORALLWALLSUPPORTS.
FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithin
therangeoftolerancesestablishedbyANSIStandardA112.19.2.These
measurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
FINISHED
WALL
102mm
(4")
FINISHED
FLOOR
1-1/4" O.D.
TAILPIECE
1-1/4" O.D.
WASTE
203mm
(8")
178mm
(7")
165mm
(6-1/2")
SUPPLIES
AS REQ'D.
197mm
(7-3/4")
470mm
(18-1/2")
57mm
(2-1/4")
114mm
(4-1/2")
178mm
(7")
432mm
(17")
483mm
(19")
267mm
(10-1/2")
114mm
(4-1/2")
70mm
(2-3/4")
38mm
(1-1/2")
76mm
(3")
89mm
(3-1/2")
343mm
(13-1/2")
235mm
(9-1/4")
11mm (7/16") DIA.
ANCHOR SCREW
HOLES
SOAP DEPRESSION
C/L
*
INTEGRAL
BRACKETS
HANGER
*
787mm (31") to
864mm (34
")
19mm
(3/4")
406mm
(16")
54mm (2-1/8") DIA.
HOLES FOR
CONCEALED ARMS