Cut Sheet
Technical Information
Series LED-DR 150W
Max Load 150W (non-dimming); 147W (dimming*)
Minimum Load 30W (non-dimming); 1W (dimming*)
Input Voltage 100-240V, 277V AC, 50/60Hz
Output Voltage 12V DC / 24V DC
Power Factor ≥0.95/115V AC, ≥0.9/230V AC at full load
Dimmable Secondary side dimming only*
Eciency > 91.5% (12V) > 93% (24V)
Input Wire 10” 18AWG SJTW
Output Wire 10” 14AWG SJTW
Operating Temp. -40°F - 194°F (-40°C - 90°C)
Rating cURus Recognized (wet or dry locations)
Dimensions 9”L x 2-11/16”W x 1-1/2”H
Dimming Options
• Trulux control (5-100%, no minimum load to 90%
maximum load)
Ordering Information
LED-DR150-12
LED-DR 12V - 150W Driver
LED-DR150-24
LED-DR 24V - 150W Driver
Listing / Ratings
LED-DR 150W DC Driver - 12V / 24V
The LED-DR60-24-277 features universal 120-277V AC power input
with high reliability. Standard built-in protections include short circuit,
over-current, over-voltage, and over temperature. Used commonly with
Trulux receivers and controls for secondary side dimming, they can also
be used in non-dimming applications (minimum loads apply). Its durable
metal housing carries an IP65 rating for damp location use and features
adjustable output voltage and output current levels.
Features
• 150W 24V constant voltage and constant
current driver
• Class I metal housing (Type HL)
• Short circuit, over-current, over-voltage, and
over temperature protection
• Io and Vo adjustable through built-in
potentiometers
• cURus Recognized
• Suitable for wet or dry locations; IP65
• RoHs Compliant
Wattage/Voltage Options
• 150W (12V)
• 150W (24V)
*Utilize Trulux controller + receiver combo
LED-DR - 150W
POWER SUPPLIES
TRULUX LIGHTING SYSTEMS LINEAR LIGHTING ARCHITECTURAL LIGHTINGUNDERCABINET DOWNLIGHTING
POWER SUPPLIES / CONSTANT VOLTAGE / LED-DR 150W
www.AmericanLighting.com
233