Spec Sheet

► Converts 100Base-TX to 100Base-FX
► Support 100Base-TX Full/Half-duplex, Auto-negotiation,
Auto-MDI/MDIX
►
►
Single mode or Multi-mode fiber operation
► Meet EIA RS-232/422/485 specifications
► MDI/MDIX Auto-crossover supported
►
Single or Dual-core fiber with SC, ST or FC connectors
►
Full RS-485 Tri-state support
►
►
Plug-and-play
► Sleek Microtype design, fits within most camera housings
Transparent to data encoding
►
Environmentally hardened
-40ºC to 75ºC (-40ºF to 167ºF) operating temperature
Warranty
►
5-Year Warranty
Typical Application
Features
ET1111SDH Series
Hardened Microtype 100Base-TX to 100Base-FX Ethernet Media Converter with 1-ch Serial Data
E
1
10
100
M
F
1
UTP Ethernet
Serial Data
1 fiber
PTZ IP Camera
ET1111SDH-X-MT
ET1111SDH-X-MT
Serial Data
UTP Ethernet
1
RS232
RS422
RS485
D ATA
Fast Ethernet Media Converters
Ethernet
Standards
Cabling
IEEE802.3u 100Base-TX/FX
IEEE802.3x Flow Control
Cat5 or above
Forward Filter Rate
148,800pps (100Mbps)
Processing Type
Forward
Maximum Distance
Connector
100m
1 x RJ45
Serial Data
Number of Channels
Data Direction
1
Bi-directional
Specifications
Media Converters
Data Interface
Selection Method
DIP Switch-selectable
RS232, RS422, RS485 2 or 4-wire Tri-state
Data Rate
0~115.2 kbps
Connector
7-pin screw terminal
Data Format
MPD (Manchester, Bi-phase, etc)
Optical
Optical
62.5/125μm (Multimode)
9/125μm (Singlemode)
Maximum Distance
2Km (Multimode)
20Km (Singlemode)
Wavelength
1310/1550nm (1-fiber)
Connector
SC/ST
www.ot-systems.com
1
Electrical and Mechanical
Input Power
Power Consumption
12VDC (Terminal Block)
2.4W Max. 0.2A@ 12VDC