User's Manual

Table Of Contents
User Manual
Installation the battery
1. Make sure your radio is turned OFF.
2. Remove the battery compartment door.
3. Install the 3 NiMH rechargeable battery or 3 AAA Alkaline batteries into the
battery compartment.
4. Replace the battery compartment door.
Basic radio operations
1. Press to turn on.
2. Press to enter the channel settings, the channel display pattern starts flashing,with
to select. Press PTT to confirm and exit.
3. Press twice to enter the setting. OFF for no code, 01~38 for CTCSS code,39-99 for
DCS code.
4. Press for 3 times to enter the Vox function selection. there are OFF,1,2.3 these 3 gear
sensitivity optional.
5. Press for 4 times to enter the CALL tone selection function. They are 01 to 10 sounds
available.
6. Press for 5 times to enter the key tone selection function, select the button when the
ON button will beep a tone, select the OFF button when there is no tone.
7. Press for 6 times to enter the launch end of the tone selection function, with to select.
select ON to release the PTT will have a tone, the opposite choice of OFF there is no tone.
8. Press for 7 times and exit can also press PTT to confirm the exit menu.
Note
It doesn’t has charging function, it can’t be charged directly through charger base and so on , it
only can be charged by a NiMH vrechargeable battery.
When installing the battery, please pay attention to the corresponding positive and negative
placement!
01

Summary of content (7 pages)