PRO EVENT TABLE II PRO EVENT TABLE MB use guide
©2021 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ logo and identifying product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
CONTENTS General Information 4 Limited Warranty 6 Setup Instructions 7 Dimensional Drawings 11 Optional Accessories 11 3 www.adj.
G E N E RA L I N F O RM AT I O N INTRODUCTION The ADJ® PRO EVENT TABLE II™ is a modern cleaning looking compact and collapsible DJ table, that provides a professional alternative to folding banquet tables. Not only is it lightweight and easily portable, but this cleverly-designed event surface is easily brandable, making it ideal for a wide variety of purposes at all kinds of events. The PRO EVENT TABLE II collapses in half for easy transport.
CUSTOMER SUPPORT ADJ® provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.adj.com for any comments or suggestions. For service related issue please contact ADJ. ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST Voice: 800-322-6337 Fax: 323-532-2941 E-mail: support@americandj.
LIMITED WARRANTY A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty periods below). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
SETUP INSTRUCTIONS 1. Unfold both table sections and position them close towards each other. 2. Intersect both table sections together, inserting one side into the other side. 7 www.adj.
3. Make sure both table sections fit together properly and there are no gaps/spaces between them. 4. Secure both table sections together by installing (2) black metal table support bars. Insert square ends of each support bar into the slots on each side of the table. Insert the front bar first then insert the back bar. Make sure each support bar is completely inserted into the slots and make sure both table sections are level and sitting on a flat surface. www.adj.
5. Hand tighten the (4) thumb screws located on the support bar slots on both ends of the table. 6. Place the carpeted shelf inside the top section of the table on top of both metal support bars, with the open cable hole facing front. Make sure the shelf is completely installed and flat before placing any equipment on it. 9 www.adj.
7. Attach included ADJ logo poster board to the front side of the table using the included (4) screws. Make sure not to overtighten the screws to avoid poster board damage. Poster Board Dimensions: L 25" (635mm) x H 22.5" (571.5mm) www.adj.
DIMENSIONAL DRAWINGS OPTIONAL ACCESSORIES ORDER CODE ITEM PRO888 PRO-SHELF ALUMINUM SHELVES PRO821 PRO-ETB CARRYING BAG PRO379 PRO EVENT SCRIM - WHITE 11 www.adj.