UltraHD 4MP Dome Outdoor Camera AMC4MDM28-W Quick Start Guide Version 1.0.0.
Contents Welcome................................................................................................................................................................ 3 Important Safeguards and Warnings....................................................................................................................... 3 Product Introduction .............................................................................................................................................. 4 Features ...
Welcome Thank you for purchasing an Amcrest camera! This user manual is designed to be a reference tool for the installation and operation of your camera. Here you can find information about the camera’s features and functions, as well as information to aid in troubleshooting. Many of the setup and installation sections have corresponding videos on YouTube. To access the setup videos, please go to http://amcrest.com/videos.
7. Accessories Be sure to use only the accessories recommended by the manufacturer. Before installation, please open the package and check to make sure that all the components are present. Contact the retailer that you purchased from or Amcrest directly if anything is broken or missing in the package. Product Introduction This series of camera is adopted with CMOS image sensors that provide high performance, high megapixel resolution that supports 4K video.
3) Using a drill bit that is the same diameter or slightly smaller diameter than the included drywall wall anchors, drill the 4 holes and insert the wall anchors into the holes. Note: The wall anchors should be in the same bag as the screws and a designed to secure the screws onto the mounting surface. 4) Attach the power cable and BNC cabling to the camera. (If you are running the cables through a mounting surface, use a 1” paddle bit to bore a hole for the cables.
Mount Type Board-in General Power Supply DC12V, 2.0A Power Consumption Max 3.2W Working Environment -40°F~140°F / Less than 90%RH (no condensation) Transmission Distance Over 1640ft via 75-3 coaxial cable Ingress Protection IP67 Dimensions Φ3.68” x 3.13” Weight 0.62lbs Material Aluminum FCC Statement 1. This device complies with Part 15 of the FCC Rules.
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
• • • Note: • To view setup videos for many of the steps outlined in this guide, go to http://amcrest.com/videos This document is for reference only. Slight differences may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners. To contact Amcrest support, please do one of the following: Visit https://amcrest.com/contacts and use the email form.