User Manual 1
Dear Customer, Thank you for purchasing Mobile phone. Kindly read this user manual carefully to learn about key functional characteristics and operational methods of this mobile phone. Contents I Safety and precautions……………………………....……………………...3 II Cell phone outline………………………………....………………….…......4 III Getting Started……………………………………………….……….....….4 IV Description of cell phone……………………....……………….……....….8 V Basic operation of cell phone…………………........…………….….……10 VI Operation of menu functions......
I. Safety and Precautions: To use your phone safely and effectively, please read the following information before use: • Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other explosives. • To ensure safety, please use earphone during driving; Otherwise, unless emergency, make a call after parking your car by the roadside. DO NOT use the phone during driving at high speed. • Do not use your cell phone while in a plane.
Note: The Company won't undertake any responsibility for any consequences caused by failure to observe the above-mentioned suggestions or improper applications. If any content described in this manual goes against that of your cell phone, it is subject to the real cell phone. MAXX operates a policy of continuous development. MAXX reserves the right to make changes and improvements to any of the products described in this document without prior notice.
required for communications are stored in the SIM cards. Personal data, including the PIN (personal identification number) phonebook, SMS and other extra system services can also be stored in the SIM cards. Warning: DO NOT twist or scratch the SIM card and expose it to static electricity, dust or water If you lose your SIM card, please contact your network operator for help.
selected, the accessories adopted for cell phone and other applied program modes. To optimize the performance of the battery, please do as follows: • New battery or a battery left unused for a long duration should be charged for a long time. • Keep the temperature at room temperature when charging. • The battery may require longer time to be fully charged after being used for a long time and this is normal.
Enter appointed shortcut under standby status. OK Key: Confirm an operation in menus. Number keys: Input numbers or characters. Long press the number keys 1to 9 to quick-dial while standby. Long press the # key to switched to silent and quit silent mode under standby status. Short press the * key repeatedly or long press it to enter “P”, “+” or “W” characters under dialing interface.
• • • • press the dialing key. If called by SIM card 1, the screen will display “SIM Card 1 Dialing”, and if called by SIM card 2, the screen will display “SIM Card 2 Dialing”. Call status will be displayed on the screen when the call is answered. Press the hang-up key to end the call. Make domestic calls: zone number + phone number + dialing key. Making an international call: To make an international call, long press or repeatedly short press the * key until the symbol “+” is displayed on the screen.
After plugging into a SIM card, the phone will automatically check SIM card for availability, then the display screen will indicate the following prompts in sequence: 1) “Enter phone lock password” ―― if you have started up the phone lock (default password: “1234”) 2) “Enter SIM 1/2 PIN” ―― if you have started up the SIM card 1/2 lock. 3) “No service” ―― it represents the register network failure, and you cannot make a call at such time. 4) “Emergency Call” ―― it allows to call 112.
If the call is to SIM card 2, “SIM 2 incoming” will be displayed in front of the number or name. Speed dial: The phone provides 8 speed buttons, and you can define the phone numbers corresponding to these buttons. So, as long as you long press [2 to 9] keys in standby status, you can call speedily; [1] key is specially used for the speed dial of voice mailbox number.
In the standby mode, select Menu and the desired menu and submenu. Select Exit or Back to exit the current level of menu. Press the end key to return to the standby mode directly. 1. Messages: SMS: The SMS function is a network service. You may need to apply to the network operator first before you can send and receive a short message. Your cell phone supports the short message sending function. Short messages are sent to network SMS center first and then sent to subscribers.
e. Text format: Set the font, align and paragraph of the texts. • Save to Drafts: To save the messages to drafts. • Send a message: When a message is composed and the SIM card is selected, you can send the message to the receiver through the following ways: 1. Send: Send the message directly. 2. Edit recipient: To edit the recipient of the text message. 3. Remove recipient: To remove the recipients of the text message. 4. Remove all recipients: To remove all the recipients of the text message.
Delete messages: To delete the messages from the inbox, outbox, drafts, sent messages. MMS: A multimedia message can contain character, audio file and picture. If the size of a multimedia message is over the limit, the phone cannot receive this multimedia message. The display effect of multimedia messages may vary with different receiving equipment. Note: You can use this function only when the service is supported by your network operator or service provider.
and the time received. • Reply path: To transfer the reply path to the network terminal. This function requires the support of message center. • Save sent message: To save the sent message. Memory Status: Check memory space use of SIM card or mobile phone. Preferred Storage: Appoint the directory to save the message. (SIM cards or mobile phone 2.
h. Delete all contacts: You can delete all the names and phone numbers from the SIM cards 1/2 and phone together or delete one by one. 3. Call History: SIM 1/2 call history: SIM 1/2 missed calls: To view the missed calls (requiring network service support) SIM 1/2 dialled calls: To view the most recently dialed numbers. SIM 1/2 received calls: To view the most recently received phone calls (if available from the network) Delete SIM 1/2 call logs: To delete recent call logs.
• Only SIM2 open: Enable SIM card 2 in standby status. • Flight Mode: In Flight Mode, the network and radio transceivers are turned Off to prevent disturbance to sensitive equipment. When the flight menu is activated, you are asked to select a mode the next time you turn on your phone. Normal: full functionality. Flight Mode: limited functionality. Phone settings: Time and date: With this menu, you can set city, time/date, and time/date format. • Set time zone: To set the home city.
Select any one of all shortcut menus and press left key to enter one of the following menu options: • Add: Add a new application to shortcut menu. • Edit: Replace the selected shortcut from one of the shortcut menu. • Delete: To delete the selected shortcut menu. • Delete all: To delete all shortcut menus set. • Disable: To close the selected shortcut menus. • Change order: To change the order of shortcut menus.
SIM 1/2 call settings: Caller ID: Includes-- default, hide number and show number. 1. Set by network: The number of the phone will be sent as per the default mode when a call is initiated. 2. Hide ID: The number of the phone will not be sent when a call is initiated. If the system doesn't support this function, it may not make a call. 3. Send ID: The number of the phone will be sent when a call is initiated. Note: This function requires the network support.
Line switching: Select Line 1 or Line 2. Closed user group: This function requires support of network. Please consult your network operator for more information. Advance settings: a. Blacklist: You can enable or disable the blacklist numbers. b. Auto redial: You can enable or disable auto redial function. If a number is not reachable, the phone will automatically redial.
Add, Edit, Delete, and Delete All and jump to date etc. If the alarm reminder is set up for the memo, the cell phone will remind you with a ring once the time is up, and it will display the contents of the memo settings. . Calculator: • Eight operators, i.e. “+”, “-”, “×”, “÷”, “m+”, “m-”, “mc”, and “mr”, are provided. • Choose the Clear or press the right soft key to clear items entered. Long press the Clear or long press the right soft key to clear all content.
downloaded to your PC, view them with the right software. When the phone has insufficient memory space for new photos, you should delete some old photos or other files in the "File Manager" function list to release memory space for new pictures Press option, you will see the following menus: • • • • • • • • Photos/Image Viewer: To view a saved photo. Camera settings: To set the corresponding parameters of the camera. Image settings: To set the corresponding parameters of the photo to be shot.
• • • • Delete: To delete the selected video file. Delete all files: To delete all video files. Sort by: To sort video files by desired method. Storage: To select the storage directory (cell phone or memory card) for a video file. Audio Player: The operating systems other than WIN2000 do not need to install the drivers. When the phone is connected to PC using USB, the selected MP3 need to be copied to “My Music” root directory, otherwise it cannot be played.
• File list: To see the recorded file. Schedule FM record: To set the time for FM radio, you can also record the FM as per set time. 6. File manager: This menu enables you to access the File Manager, where folders or files in the memory card or the phone can be managed • Open: To open the selected file stored. • Format: To format the memory. • Rename: To rename the memory. • Details: To view the details of memory. Caution: You will lose all the data stored in the memory after format 7.
Note: The phone automatically switches to the Bluetooth mode when the Bluetooth equipment is plugged, and it restores to the previous mode when the Bluetooth is unplugged. Long press the "#" key when the phone is in the standby state to switch the phone to the silent mode. Long press it again will restore to the previous mode. 9.
Smart English input: Press the numeric keys 2 to 9, the letters contained in the number and the corresponding number will appear on the screen. Enter a word: Under smart English input method, continuously press 2 to 9 keys for twice or more, the corresponding word will appear on the screen. For example, if you want to enter “book”, press the numeric keys “2665”, and then select the word “book”. You can press the 0 key to enter a space when you need to.
X.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: U-300-2(FCC ID:ZU3UNNECTODRIFT) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.787W/kg and when properly worn on the body is 0.420W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.