User's Guide
Driver installation
Method 1: Port installation
1) double click the driver installation file;
2) select and install the printer driver and proceed ,then to the next step;
3) select, other, next step;
4) choose the type of printer and go to the next step;
5) specify the port and select according to the current printer;
6) when the printer driver installation prompts that the installation is successful, click"finish".
Method 2: Add mode installation
1) enter the interface of printer, click add printer;
2) click add local printer;
3) select the printer port, select the existing port
(select the port of your current printer), and next step;
4) select install from disk, browse and drive installation directory
(default C disk), select execute file and confirm;
5) choose the type of printer and go to the next step;
6) when the printer driver is installed and show successful, then click "finish".
TP450 User Guide
1 TP450 Printer
www.entrylogic.com
This box contains the following:
1 Power Adapter
1 Power Cable
1 USB Cable
1 User Manual
Printer Function Introduction:
1 Button Name Indicator
1) FEED Button
2) PAUSE Button
3) POWER/ON LINE Indicator
4) ERROR Indicator
ERROR Indicator
FEED Button
Power
Indicator
Pause
Indicator
Open top cover
Drop paper roll in
the hole as illustrated
Pull the paper into the
paper holder,then close
top cover
Print one self-test to
make sure paper
correctly installed.
Paper Roll Installation:
1.
2.
3.
4.
Buttons:
1
2
3
4
5
6
1. Turn off the printer power.
2. Press and hold on the PAUSE button and FEED button,
then turn on the printer power. When the POWER indicator
lights and ERROR indicator dims,release both buttons.
The printer DRAM is cleared and printer settings are
restored to defaults.
Press the FEED button when POWER indicator is on and
ERROR indicator is off. It feeds the label to the beginning of
the next label.
Feed
Pause
Self-test
Dump mode
Mode Switch
Initialize
Press the FEED button during printing and the printing
job is suspended
1. Turn off the printer power.
2. Make sure the paper roll is installed correctly and the
printer top cover is close
3. Press the FEED button and turning on the printer power
simultaneously. When the self-test paper comes out, release
the FEED button.
1. Turn off the printer power.
2. Make sure the paper roll is installed correctly and the
printer top cover is close
3. Press and hold on the PAUSE button and FEED button, then
turn on the printer power. When the POWER indicator and
ERROR indicator light simultaneously release both buttons.
The printer is changed to Dump Mode.
1. Turn off the printer power.
2. Make sure the paper roll is installed correctly and the
printer top cover is close
3. Press PAUSE button, then turn on the printer power. When
the POWER indicator and ERROR indicator light, print mode
switching prompt aer 2-3 seconds,and both lights flash at
the same time.Press the FEED button to switch modes.
Then restart the printer.
Item Functions Descriptions
Connection:
A) Connect AC power cord to
power,DC power cord to printer.
B) Connect printer and
compter/tablet.
A) USB Interface
B) Power Cord
ATTENTION:
1. Use your printer on stable surfaces, that avoid external vibrations.
2. Do not use or store printer in high temperature, high humidity, polluted environments.
3. Connect the power adapter properly to grounded receptacle. Avoid using the same socket
with large power consuming devices, that can lead to power flucutation.
4. Avoid water or other objects going into the printer. If this occurs, turn off the printer immediately
5. Printing without an installed paper roll will seriously damage the printing head.
6. Unplug your printer from power receptable when unused for long periods.
7. Only use approved accessories. Never try to disassemble, repair or remodel your printer.
8. Use standard power adapter.
9. Use high quality paper. This ensures the printing quality and life of the printer.
10. Please turn off power before plugging / unplugging cables.
11. The printer is only suitable for use in tropical climates below 5000 meters sea level.
Printer head cleaning steps:
1. Turn printer off, release power cord. Open top cover, and take out paper roll
2. Wait until printing head cools off if it’s just finished printing
3. Clean printing head completely using swab with alcohol (without water)
4. Until alcohol completely volatized, close top cover.
5. Connect power again, print test to check if clean.
1. Please make sure power is off during printer maintenance.
2. Do not touch or scratch the printing head surface, rollers, or sensors.
3. Avoid gas, acetone or other organic solvents.
4. Wait until alcohol has completely volatized, close the top cover, and
connect to power source again. Print a self-test to make sure your printer
is working properly.
Cleaning your printer
Clean your print if text is not clear,printed columns are unclear, or the paper feeds noisily.
PLEASE NOTE