Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T User Manual SmartPoint T Ambient Systems B.V. Page 1 of 19 Colosseum 15D • 7521 PV Enschede • The Netherlands T: +31 88 2624368 • F: +31 88 2624399 • www.ambient-systems.net KvK: 08122911 • VAT NL: 81297625381 CHECK.TRACK.TRACE.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T Product Code(s): 900.100.025.003 (SP3000T), 900.100.025.005 (SP3000TH), 900.100.025.008 (SP3000TERS), 900.100.025.010 and 900.100.025.011 (SP3000T1W) Table of Contents 1Preface.......................................................................................................3 1.1What is the SmartPoint SP3000T.................................................................................3 1.2Features................................
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 2.2Related Documentation............................................................................................... 5 2.3Required Tools............................................................................................................. 5 3Product Types..............................................................................................6 4Installation.....................................................................
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 1 Preface 1.1 What is the SmartPoint SP3000T The SmartPoint(SP) SP3000T combines a high accuracy temperature sensor and extensive logging capabilities with wireless communication capabilities. Due to the devices extreme energy efficiency, it has long battery life.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T The internal temperature sensor is best-in-class with regards to energy consumption and enables long-term battery-operated usage. 3. Long Range The SP3000T has a combined Power Amplifier (PA) & Low Noise Amplifier (LNA) offering maximum radio range. 4. Easy Installation Due to the fact that the SP3000T is powered by an internal battery, it can be configured and installed within minutes. 5.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T code are emphasized in bold face (example), if they have been added or changed since the preceding example. Important comments or reminders are indicated in bold and separated by borders, as follows: Example An administrator is generally a person who is in charge of installing and running Ambient Studio or any other related system software.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T www.ambient-systems.net The Support section can be accessed via login. Please contact our Customer Support via support@ambient-systems.net if you have not yet received the login details. Ambient Systems B.V. Page 7 of 19 Colosseum 15D • 7521 PV Enschede • The Netherlands T: +31 88 2624368 • F: +31 88 2624399 • www.ambient-systems.net KvK: 08122911 • VAT NL: 81297625381 CHECK.TRACK.TRACE.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 2 Introduction 2.1 About This Manual This manual provides practical information for using the SP3000T. It addresses firsttime use, installation and mounting instructions, operation, storage conditions, etc. 2.2 Related Documentation Document Description Data Sheet: The SP3000T data sheet contains detailed information of the SP3000T specification.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 2.3 Required Tools In order to verify proper operation of the SP3000T, the following devices and tools are required: 1. Gateway A GW with power adapter and serial cable. 2. Laptop/PC A laptop or Personal Computer(PC) is required to run Ambient Studio. 3. Ambient Studio Ambient Studio needs to be installed on the laptop or PC. 4. USB to Serial converter In case the laptop or PC does not have a COM port, a USB to serial converter.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 3 Product Types There are four different types of the SP3000T, namely: • SP3000T • SP3000TH • SP3000TERS • SP3000T1W The SP3000T only measures temperature. The other devices use this model as a basis and therefore also provide temperature samples, via the internal temperature sensor. The SP3000TH provides humidity samples.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 4 Installation 4.1 Preparation Before the SP3000T can be installed, please ensure you have all the required tools available. It is strongly recommended to first read the User Manuals on the Ambient 3000 Series 3rd Generation Active RFID and Ambient Studio. Knowledge of Ambient Studio is a pre-requisite in order to verify the operational status of the SP3000T and associated configuration. 4.2 First Time Use 1.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 3. Observe readings from SP in Ambient Studio Once awakened, the device will adopt operational status. The SP is now visible in Ambient Studio. In default configuration, the SP will report temperature every 15 minutes in a message from the DDI driver DDI(11:1:1) TMP::TMP102. In the ‘DDI’ tab of Ambient Studio, set the filter to select the ID of the device. The received queue should display all received DDI(11:1:1) messages.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 4.3 Mounting The SP3000T has a single mounting hole in the centre of the casing. This can be used in various ways to attach the device to the required surface, e.g. bolt and magnet, cord, or tie wrap. 5 Calibration Ambient offers a calibration service which allows the calibration of the internal sensor(s). This calibration is performed by an independent certified calibration institute. Contact our support department for more information.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 6 Powering Options The SP3000T has an internal battery pack which, even in hibernation will be subject to a minute and continuous drain and should typically be replaced once every 5 years4. Ambient offers a refurbishment service for devices which require a battery replacement. Contact our support department for more information. 4 Under the assumption that power loss occurs once every month for a period of 24 hours. Ambient Systems B.V.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 7 LED Behavior 7.1 Awaken from hibernation When the SP awakens from hibernation, the device will flash the internal LED several times. 7.2 Rapid Response mode After awakening from hibernation, the device enters a rapid response mode for a period of 15 minutes. During this period, the device will flash the internal LED every 30 seconds. 7.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 8 DDI Drivers The following DDI drivers are installed on the SP3000T • DDI(0:0) System::DDI • DDI(0:1) System::Echo • DDI(0:2) System::Version • DDI(0:3) System::FileSystem • DDI(0:4) System::Reset • DDI(0:10) System::SmartPointPower • DDI(0:12) System::Logger • DDI(0:13) System::KeyManager • DDI(0:15) System::SmartPointLED • DDI(3:5) Network::RapidClient • DDI(3:9) Network::SmartPoint • DDI(3:10) • DDI(
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T The SP3000TH has the following additional driver: • DDI(12:1) Humidity::SHT-H The SP3000ERS has the following additional driver: • DDI(17:1) Contact::OpenClose The SP3000T1W has the following additional driver: • DDI(11:5) Temperature::DS18B20 Ambient Systems B.V. Page 17 of 19 Colosseum 15D • 7521 PV Enschede • The Netherlands T: +31 88 2624368 • F: +31 88 2624399 • www.ambient-systems.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 9 Storage The SP3000T should be stored in a dry area at room temperature. 10 Disposal All SP3000T products are considered Waste Electrical and Electronic Equipment (WEEE) and should be disposed of accordingly. If you have any questions regarding this matter, please contact our support department. Ambient Systems B.V. Page 18 of 19 Colosseum 15D • 7521 PV Enschede • The Netherlands T: +31 88 2624368 • F: +31 88 2624399 • www.
Model: SP3000T Revision P1A/01102013 USER MANUAL SmartPoint SP3000T 11 Appendices 11.1 Appendix A: Technical Support You can contact Ambient Systems technical support through our web site or by email. Before you contact technical support, please have the following ready: 1. Ambient Studio version (see About box) 2.