Quick-Start Guide

The mounting adaptor (ATHPD) serves to adapt the

diameter of the „TinyMike“ to camera's microphone

bracket.

One to two layers of the supplied foam rubber build up

the diameter. Start and end the foam rubber near the

slit. For most Sony cameras one layer, for most Panaso-

nic two layers are suﬃcient.

ADAPTOR

MADE IN GERMANY

www.ambient.de/en

ATHPD

When done, insert the cable through the barrel adaptor

and plug it into the microphone.

Then insert the „TinyMike“ into the ATHPD.

Mounting Adaptor for the „TinyMike“ (ATM216)

PAGE 1
ADAPTOR MADE IN GERMANY ATHPD Mounting Adaptor for the „TinyMike“ (ATM216) The mounting adaptor (ATHPD) serves to adapt the diameter of the „TinyMike“ to camera's microphone bracket. One to two layers of the supplied foam rubber build up the diameter. Start and end the foam rubber near the slit. For most Sony cameras one layer, for most Panasonic two layers are suﬃcient. When done, insert the cable through the barrel adaptor and plug it into the microphone. Then insert the „TinyMike“ into the ATHPD.