Ultra-Light True Wireless Bluetooth Earbuds Écouteurs Bluetooth Vraiment Sans Fil et Ultralégers Ultraleichte Kabellose Bluetooth-Ohrhörer Capsule Bluetooth Senza Fili Leggerissime Auriculares de Botón True Wireless Bluetooth Ultraligeros Zeer Lichte Echt Draadloze Bluetooth Oortjes 超軽量本格ワイヤレス Bluetooth イヤバッド B07T3VJKF4, B07T3VHSQ5
English....... ����������������� 3 Français..... ��������������� 20 Deutsch.. .... ��������������� 36 Italiano....... ��������������� 52 Español...... ��������������� 68 Nederlands.
Welcome Guide • English Contents: Before getting started, ensure the package contains the following components: G A F B C C H D I E K L M J 3
A Battery-powered case H Indicator light B USB Micro B port I MF (multifunction) switch C Charging contact points J Microphone D Charging indicators K Small ear tip x2 (L/R) E USB cable L Medium ear tip x2 (L/R) F Earbud x2 M Large ear tip x2 (L/R) G Charging contact points IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
Battery Warnings • The battery contained in this product is non-replaceable. Do not throw the product into a fire. • Do not leave the battery charging for a prolonged period of time when the product is not in use. • Do not charge overnight. • Charge this product once every 3 months to avoid shortening its battery life. • Charge this product only with a compatible power source from reputable manufacturers e.g. a power adapter or USB port on a PC.
Before First Use • Check for transport damages. • Remove the film of the back earbud housing (This film is used to isolate the earbuds from the case to reserve the case battery during transportation). L R DANGER Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.
Stereo mode Dual Mode: The left and right earbuds (F) are as a whole item. 1. Power on and pairing A B 5s Take the earbuds (F) out of the case (A) at the same time or press the MF switch (I) on both earbuds (F) up to 5 seconds to turn them on manually, and wait for 5 seconds. The right earbud will blink red and blue alternately which indicates both earbuds (F) have paired automatically. 2.
3. Power off A B 5s Return to the case (A) or press the MF switch(I) on either one of the earbuds (F) up to 5 seconds to turn off the earbuds (F). Mono mode Single Mode: The left or right earbud is as a separate item. NOTICE Make sure that the right earbud keeps off throughout the whole process. 1. Power on pairing Take the left earbud out of the case (A), and wait for 5 seconds. The left earbud will blink red and blue alternately once it enters pairing mode.
2. Connected Search and select “AmazonBasics BE-2101 L” from the list on your device to finish settings with a voice prompt from the left earbud, and the left earbud will blink blue every 5 seconds once the device is connected successfully. L < 3.2' (< 1 m) AmazonBasics BE-2101 L 3. Power off L 5s Put the left earbud back into the case (A) or press the MF switch (I) up to 5 seconds to turn it off. NOTICE The above steps are also applicable to the right earbud.
Switching from Mono to Stereo pairing NOTICE This function only works if each earbud had been individually paired with the device before. • While the L or R earbud is connected, take out the other earbud from the case (A). • Wait for a beep tone from the previously not connected piece. This confirms that the other earbud is also added into the Bluetooth® connection.
Activate voice assistant NOTICE This function is supported only on certain devices. L/R x2 Activate Siri / Google assiant Charging the earbuds (F) The earbuds (F) starts charging automatically when returned to the case (A).
Charging the case (A) Use 5V—1A adapter (not included) to charge the case (A). The white LED indicators are blinking while charging. All of them will keep on when fully charged. 0 – 25% 75 – 99% 25 – 50% 50 – 75% 100% Battery LED Indicator 25% 50% 75% 100% Put the earbuds (F) back into the case (A) to trigger the battery level status. The four LED indicators correspond to different battery levels.
Reset 1. Clear the device’s Bluetooth list,press and hold the MF switch (I) of both earbuds for 5 seconds at the same time to switch off the earbuds (F) until both earbuds (F) blink red 3 times 2. Press and hold the MF switch (I) of both earbuds (F) at the same time until it blinks purple, the earbuds reboot.
Cleaning and Maintenance NOTICE During cleaning do not immerse the electrical parts of the product in water or other liquids. Cleaning • To clean, wipe with a soft, slightly moist cloth. • Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product. Storage • Store in a cool and dry place away from children and pets, ideally in the case (A). FCC Compliance Statement 1. This device complies with Part 15 of the FCC rules.
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Canada IC Notice • This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. • This Class B digital apparatus complies with Canadian CAN ICES3(B) / NMB-3(B) standard.
Disposal The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life.
Trademarks The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Amazon.com, Inc. or its affiliates is under license. Specifications (Battery-powered case) Voltage/battery type: 3.8 V Charging time: 1.5 hours Power consumption: 2.05 W , 410 mAH Specifications (earbuds) 18 Voltage/battery type: 3.7 V , 55 mAH Charging time: 1.5 hours Playback time: 3.5 hours Power consumption: 0.
RF power: 4 dBm Frequency range: 2402 to 2480 MHz Sensitivity: 87 ± 3 dB @ 1 kHz Impedance: 16 Ω Support: A2DP V1.3, AVRCP V1.5, HFP V1.7 Bluetooth® version: 5.0 Operating distance: 32.8 ft (10 m) IP rating (earbuds only): IPX4 Net weight: approx. 1.6 oz (45 g) Warranty Information To obtain a copy of the warranty for this product: US: amazon.com/AmazonBasics/Warranty UK: amazon.co.
amazon.