Amazfit Neo User Manual Contents Operating instructions and function navigation ....................................................................2 Key operations ..........................................................................................................................2 Wearing and charging the watch ................................................................................................3 Using the watch ..............................................................................
Operating instructions and function navigation The Amazfit Neo is equipped with an STN screen and four physical keys. Key operations Key name: SELECT Key function: confirm or select 1. Pairing page: confirm 2. Factory Reset page: confirm 3. Function of the key on a specific page: Stopwatch page: start, pause, or continue Workout secondary screen: pause or continue Single heart rate measurement: Begin measurement. DND mode: switch and confirm 4. Power-on/off: Press and hold the SELECT key for 2s.
1. Page down: Press the DOWN key to switch between different functional pages. 2. Stopwatch page: When the stopwatch is paused, press this key to check the counting records. Key combinations: Press and hold a key combination for 2s. 1. Reboot: SELECT + UP 2. Factory Reset: BACK + DOWN 3. Regulation: SELECT + DOWN 4.
Using the watch Before using the Amazfit Neo, download the Zepp app on your mobile phone. You can enjoy all functions of the watch and save data generated by the watch to your personal cloud account only after you pair your phone with the watch through the Zepp app. Pairing and unpairing the watch 1. Scan the QR code on the user manual to download the Zepp app, register an account, and log in to the account. 2.
page. Functional pages Press the UP or DOWN key to switch between different functional pages. Step count: Displays the current number of steps. Distance: Displays the current distance. Consumption: Displays the current number of calories consumed.
Weather: Displays today's weather data. If the weather data cannot be displayed, connect the watch to the app on your phone, and update the weather data. DND: ON: The DND mode is enabled, and the watch can no longer receive notifications pushed by your phone. OFF: The DND mode is disabled, and the watch can once again receive notifications from your phone. SMART: The smart DND function is enabled. When the watch detects that you are asleep, the DND mode is automatically enabled.
Stopwatch: The result is accurate to hundredths of a second. 1、 Start: Press the SELECT key to start timing. 2、 Count: During the timing process, you can press the UP key to log the times. Up to 9 times can be logged. 3、 Pause: During the timing process, you can press the SELECT key to pause the stopwatch. 4、 Reset: When the stopwatch is paused, you can press the BACK key to reset the stopwatch, that is, to return to the stopwatch home page.
Heart Rate: 1. Go to the heart rate page. The watch automatically measures your heart rate. During the measurement process, properly wear the watch and keep the back of the watch close to your skin until the watch can measure a stable heart rate. 2. To start a single heart rate measurement, press the SELECT key. 3. To enable all-day heart rate detection, open the app, choose Profile > Amazfit Neo > Heart rate detection, and select Automatic heart rate detection.
2. End (Back): On the Pause page, press the BACK key. Notifications Enable the notifications function To use the notifications function, you need to enable the app notifications function in the app, and keep the watch connected with your phone. You can also enable the SMS and incoming call notifications. 1. If your phone uses the iOS system, pair the watch with your phone through Bluetooth. 2.
Workout reminder During a workout, the watch generates a notification every kilometer/mile. Find my phone Amazfit Neo allows you to find your phone through Bluetooth. You can press the BACK and UP keys on your watch to enable this function. 1. To use this function, ensure that the app is running and the watch is connected with the phone. If the app is not running or the watch is not connected with the phone, the function cannot be used. 2. Go to the Find my phone page.
Factory reset This function restores the watch's factory settings. On the factory reset page, you can use keys as follows: 1. Restore factory settings: Press and hold the BACK + DOWN keys. 2. Confirm: Press the SELECT key. 3. Cancel (Return to the original watch face): Press the BACK key.