/N\ Alpha mount Table Top TV Stand Instruction Manual esl Say Thank you for choosing this Alpha mount product! At Mountaintop we strive to provide you with the best quality products and services in the industry.
IMPORTANT SAFETY INFORMATION Please carefully read al Instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer service at CAUTION: Avoid potential personal injuries and property damage! Deo not use this product for any purpose they is not explicitly specified in this manual. Do not excess weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate uss.
Ta aa ate Te A WARNING: This product contains small items that could be a choking hazard if swallowed, Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. If you McGuire replacement parts, contact our customer service at + Please note: Not all hardware Included In this package will bs used. ote: The bolt is shown in accordance with the actual size : IES Ma Bolt Rubber Foot $8.5xp16x1.5 $8. 2xgp18x1.
Tal sae TL eg ele {C) x4 $6.5xd16x1.5 @G) x4 Washer Mut 5/32in.
Comers Note: Kindly note that the tempered glass bass is designed to show the shiny glass side facing up Step 1-2| Connect the lower support pillar [02] to tempered glass base [01] Secure the lower support pillar [02] to tempered glass base [01] using plastic cover [04], washers [C], plastic washers [D], bolts [B] and Allen key [1]
Step 2 Connect the Upper Support Pillar [03] to Lower Support Pillar [02] i Note: There are three choices for ! | height adjustment.
Step 3 Connect the Front Support to Upper Support Pillar [03] Note: Do not fumy nightstand these two baits! F] until the other front | support [05] is insert | ad Into the connecting | plate [06]. ; Ensure the all PCs bolts | F] are firmly tightened.
Step 4 Secure the TV Brackets to TV Only ona bolt size fits your TV. Bolt length: Verify adequate thread engagement with bolts or bolts/spacers combination. We recommend thread engagement by st least Bb tums. ~Too short will not hold the TV, ~Too long wil damage the TV. Tou Short Too Long = Correct Compactor Note: If necessary, the spacers can be used In multi-layer.
Option © (For TV with A Spacers may be necessary for 2 holes ONLY. ® 0, ES Crees Option B For cable Interference or Inset holes, use spacers [TV, [Tv8] and [TVe] to create extra space between the TV and TV brackets.
Step 5 Secure TV to the Front Support Step 5-1 Hang the TV with brackets to the front support. Step 5-2 Push the bottom of the TV to front support. Step 5-3 Tighten the bolts [8] of the safety lock until the bolts touch the front support. : Note: Kindly note that TV should be hung in the center of the front } ! support to keep balance. 1 HEAVY! You may need assistance with this step.
Thank you again for choosing this Alpha mount product! All of us at Alpha mount do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.