User Guide

ALZO EASY FRAME
DIFFUSER/REFLECTOR USER GUIDE
ALZO QUICK FRAME PARTS
1. Handle
2. Folding Frame with clamp
3. Translucent Diffuser
4. Silver/White Reflector
5. Gold/White Reflector
alzovideo.com [e-mail] 800-582-7009
1863-IS
ASSEMBLE CLAMP
The clamp is assembled as shown with the bolt fitting
into the slotted side of the clamp and the washer and
ratcheting wing nut on the opposite side.
ASSEMBLE FRAME
The frame is held together with an internal elastic
shock cord. Assembling the frame requires fitting the 4
frame sections together while aligning the pins with the
slots in the ends of the tubes. With the frame together
the handle is installed in the socket of the clamp and
the 2 wing screws are tightened to fix the handle in
place and prevent rotation.
With the handle attached the fabric is attached with the
elastic straps over the corners and the corner Velcro
pulled taut and attached. It is best to attach the fabric
on opposite ends. The white surface of the silver and
gold reflectors are attached to the back of the frame.
The handle can be positioned
• For hand held overhead sunlight diffusion
• For hand held sunlight bounce fill reflector
• To perform as a self supporting bounce reflector.
The frame clamp can be attached to light stands and clamps
as well as the handle,
1
2
3
4
5
WASHER
SIDE VIEW OF CLAMP