User's Manual

ManualsBrandsAlvarion Technologies ManualsElectronicsBreezeULTRA

EMP5605H (ALVARION)

High Power 5GHz 11n Mini-PCI Adapter

5GHz IEEE802.11a/n 2T2R 300Mbps High Performance

Alvarion Ltd

21A HaBarzel Street

Tel Aviv 69710 ISRAEL

Tel: + 972-3-6456262

Fax: + 972-3-6456290

www.alvarion.com

Package Contents

1 x MiniPCI Adapter (EMP5605H

(ALVARION))

Alvarion miniPCI series radio modules perform extreme high

power and economize the power consumption on the system

platform. EMP5605H (ALVARION) is an 802.11a/n WiFi 2x2 mini-PCI

module designed specifically for integration to maximum

performance ratio. EMP5605H (ALVARION) delivers the ultimate

wireless triple play experience for video, voice, and data

transmission in the home, for the business, and on the road.

With enhanced features on the ESD protection, industrial-based

operating temperature, economized system power

consumption, industrial-best sensitivity than normal module,

MMCX connectors, and stable heating protection design, makes

the module is easily to integrate into a wide range of any

platform.

Features

Industrial-best sensitivity -90dBm@6Mbps, -72dBm@54Mbps, -89dBm@MCS0/MCS8,

-70dBm@MCS7/MCS15

Supports IEEE 802.11a/802.11n Compatible among multiple wifi networks

Enables bandwidth up to 300Mbps Fast throughput for 802.11a and 802.11n

2T2R design architecture Higher and greater reliable throughputs over range

MMCX antenna connector Two MMCX connectors

Specification

Hardware Specification

Standard

WECA(WiFi & WiFi5 Compliance), IEEE802.11a/n, RoHS

Chipset

Atheros AR9220

Physical Interface

32-bit Mini-PCI Type III A

2 x MMCX Connector

Power Requirements

External DC power in supported, Voltage=5V

Continuous Tx@802.11a <1.7A

Current Consumption Information

Tx Current Consumption

Continuous Tx@802.11n <2A

Summary of content (10 pages)

PAGE 1
Alvarion Ltd 21A HaBarzel Street Tel Aviv 69710 ISRAEL Tel: + 972-3-6456262 Fax: + 972-3-6456290 www.alvarion.com EMP5605H (ALVARION) High Power 5GHz 11n Mini-PCI Adapter 5GHz IEEE802.11a/n 2T2R 300Mbps High Performance Alvarion miniPCI series radio modules perform extreme high power and economize the power consumption on the system platform. EMP5605H (ALVARION) is an 802.11a/n WiFi 2x2 mini-PCI module designed specifically for integration to maximum performance ratio.
PAGE 2
Alvarion Ltd 21A HaBarzel Street Tel Aviv 69710 ISRAEL Tel: + 972-3-6456262 Fax: + 972-3-6456290 www.alvarion.com EMP5605H (ALVARION) High Power 5GHz 11n Mini-PCI Adapter 5GHz IEEE802.11a/n 2T2R 300Mbps High Performance Rx Current Consumption Continuous Rx <600mA Card on Current Data Communicating with AP <450mA Sleep Current Sleep Mode <100mA RF Specification Frequency Band 802.11a 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz, 5.725~5.825GHz Data rate 300 Mbps Receive Sensitivity (Typical) 802.
PAGE 3
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 4
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 165cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) Due to the facts that this module has high built-in output power and with a high gain direction antenna, the module can be used in a professional installed end product only.
PAGE 5
when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
PAGE 6
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
PAGE 7
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product.
PAGE 8
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
PAGE 9
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.
PAGE 10
personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. 2. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 165cm entre l'antenne emettrice et les personnes. 3. Antenn externe. Utiliser uniiquement les antennes approuvees par le fabricant.