Installation Instructions

ManualsBrandsAltronix ManualsPOWERCCTV Power Supply, 16 PTC Outputs, 12VDC @ 16A, 220VAC, 1U

VertiLine33DV

- 12VDC @ 8A

- Sixteen (16) PTC protected outputs

VertiLine33TDV

- 12VDC @ 16A

- Sixteen (16) PTC protected outputs

VertiLine63DV

- 24VDC @ 8A

- Sixteen (16) PTC protected outputs

VertiLine63TDV

- 24VDC @ 16A

- Sixteen (16) PTC protected outputs

VertiLine 33DV/63DV Series

Rack Mount Power Supplies

Models Include:

Rev. 090810

More than just power.

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

Installation Guide

Summary of content (8 pages)

PAGE 1
VertiLine 33DV/63DV Series Rack Mount Power Supplies Models Include: VertiLine33DV VertiLine63DV VertiLine33TDV VertiLine63TDV - 12VDC @ 8A - Sixteen (16) PTC protected outputs - 12VDC @ 16A - Sixteen (16) PTC protected outputs - 24VDC @ 8A - Sixteen (16) PTC protected outputs - 24VDC @ 16A - Sixteen (16) PTC protected outputs Installation Guide Rev. 090810 More than just power.TM Installing Company: ________________ Service Rep.
PAGE 2
Overview: Altronix VertiLine Rack Mount Power Supplies provide sixteen (16) filtered and electronically regulated power outputs in a space saving 1U EIA 19” rack mount chassis. The units are available with either 12VDC or 24VDC power outputs. VertiLine Rack Mount Power Supplies are also available with eight (8) outputs. Specifications: Agency Listing: Features: • CE European Conformity. Input: • 220VAC 50/60Hz. Output: • Filtered and electronically regulated outputs.
PAGE 3
Installation Instructions: 1. Attach mounting brackets to VertiLine unit for rack or wall mount installation (Figs. 4-5, pg. 7). Affix rubber pads to VertiLine for shelf installation (Fig. 6, pg. 7). 2. Secure the unit into rack, mount unit to a wall or place unit on a shelf as desired (unit should be spaced at least 3” from any video monitors). When installing the unit in a rack allow for one half U spacing above the unit for ventilation. 3. Insert and secure removable terminal blocks to unit (Fig.
PAGE 4
Fig. 1 Power Outputs: 12VDC or 24VDC. Illuminated master power disconnect circuit breaker (switch): • OFF position Circuit breaker tripped Switch not illuminated. • RESET (ON) position Switch illuminated. IEC 320 Connector: 220VAC 50/60Hz (grounded line cord included). Removable Terminal Block. 1c 1d 1e LED(s) 1-16: Power LED indicators.
PAGE 5
VertiLine33DV / 63DV Series Installation Guide -5- Fig.
PAGE 6
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
PAGE 7
Mounting Options: Rack Mount Installation 1. 2. 3. Remove factory installed screws from both sides of the rack chassis (Fig. 4a). Install mounting brackets (A) on the left and right side of rack chassis using the two (2) flat head screws (B) (included) (Fig. 4b). Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 4c). Fig. 4 Fig. 4a Fig. 4b Top Fig.
PAGE 8
Notes: Altronix is not responsible for any typographical errors. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.