HubWayLD8Di_16Di Installation

ManualsBrandsAltronix ManualsComputers & Accessories8 Channel Active UTP Hub/Balun Kit, 115/230VAC

Rev. 030408

Active UTP Transceiver Hub

with Integral Isolated Camera Power

Installation Guide

Models Include:

HubWayLD8Di HubWayLD16Di

- UL Listed eight (8) Channel Active UTP - UL Listed sixteen (16) Channel Active UTP

Transceiver Hub with Integral Isolated Camera Power Transceiver Hub with Integral Isolated Camera Power

HubWayLD82Di HubWayLD162Di

- UL Listed eight (8) Channel Active UTP - UL Listed sixteen (16) Channel Active UTP

Transceiver Hub with Integral Isolated Camera Power Transceiver Hub with Integral Isolated Camera Power

- Includes eight (8) UL Listed Accessory - Includes sixteen (16) UL Listed Accessory

HubWayAv Video Balun/Combiners HubWayAv Video Balun/Combiners

HubWayLD83Di HubWayLD163Di

- UL Listed eight (8) Channel Active UTP - UL Listed sixteen (16) Channel Active UTP

Transceiver Hub with Integral Isolated Camera Power Transceiver Hub with Integral Isolated Camera Power

- Includes eight (8) UL Listed Accessory - Includes sixteen (16) UL Listed Accessory

HubWayDv Video Balun/Combiners HubWayDv Video Balun/Combiners

More than just power.

Video • Data • Power

Summary of content (8 pages)

PAGE 1
Video • Data • Power Active UTP Transceiver Hub with Integral Isolated Camera Power Installation Guide Models Include: HubWayLD8Di HubWayLD16Di - UL Listed eight (8) Channel Active UTP - UL Listed sixteen (16) Channel Active UTP Transceiver Hub with Integral Isolated Camera Power Transceiver Hub with Integral Isolated Camera Power HubWayLD82Di HubWayLD162Di - UL Listed eight (8) Channel Active UTP - UL Listed sixteen (16) Channel Active UTP Transceiver Hub with Integral Isolated Camera Power Transcei
PAGE 2
Overview: Altronix HubWayLD8Di/16Di Active UTP Transceiver Hub w/Integral Isolated Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 or 16 camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel.
PAGE 3
4. Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig. 5, pg. 7). 5. Plug the grounded AC line cord (included) into the IEC 320 connector of the HubWayLD8Di/HubWayLD16Di unit (Fig. 1j, pg. 4). Insert the plug end of the line cord into a grounded AC receptacle. 6. Set voltage output selector switch of each camera channel for 24VAC or 28VAC (Fig. 1d, pg. 4). 7.
PAGE 4
-4- PICTURE GAIN 16 1 14 2 3 13 4 6 10 7 9 1g - Picture: Adjusts video quality. GAIN 8 CH 5-8 28VAC OFF 24VAC 1h - Gain: Regulates the output video and sync levels. GAIN PICTURE GAIN PICTURE 5 11 GAIN PICTURE + DATA 1-8 CH 1-4 12 PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE 15 1f - BNC Connector: Video outputs to head end equipment (DVR). Rear OFF RESET Front 1c - LED(s) 1-16: Power indicators.
PAGE 5
Po we rL ED Ty pe Ca m era Ou t to put V ca o m lta era ge Altronix Model Number In p fro ut V m o un H ltag it ub e W ay HubWayAv, HubWayDv and HubWayDvi Video Balun/Combiners: HubWayAv *24VAC/28VAC *24VAC/28VAC 24VAC cameras Green HubWayDv *24VAC/28VAC 12VDC 12VDC cameras Red HubWayDvi *24VAC/28VAC 12VDC electronically isolated 12VDC cameras w/o isolation Red *Based on camera load and structured cable length. Fig. 2 Fig. 2c Fig.
PAGE 6
Typical Applications: Fig. 4 Head End Equipment (DVR) RS485 Monitor Video Data Rear 8 7 PICTURE GAIN 1 2 3 4 CH 1-4 5 6 7 + DATA 1-8 8 6 5 4 3 PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE 2 1 GAIN PICTURE GAIN PICTURE AC POWER GAIN CH 5-8 28VAC OFF 24VAC Front CAT-5 Video Power Video Power Four (4) Video signals on a single CAT-5 Video Data Power Data (CAT-5) CAT-5 CAT-5 Max. video 3000 ft.
PAGE 7
1U EIA 19” Rack Mount Chassis Mechanical Drawing & Dimensions: 1.625”H x 19.125”W x 8.5”D REAR 1.625" 16 PICTURE GAIN 14 15 13 12 PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE 11 GAIN PICTURE 10 9 GAIN PICTURE GAIN PICTURE 8 GAIN PICTURE GAIN 7 6 5 4 PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE 3 GAIN PICTURE 2 1 GAIN PICTURE GAIN PICTURE AC POWER GAIN TOP & BOTTOM 17.625" 8.
PAGE 8
Mounting Options: Rack Mount Installation 1- Remove and discard factory installed screws from both sides of rack chassis (Fig. 6a). 2- Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B) (included) (Fig. 6b). 3- Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 6c). Fig. 6 Fig. 6b Fig. 6a Fig.