Data Sheet

eBridge1PCRT - IP/PoE over Coax Kit
Rev. DSeBridge1CRT_10222014
Specifications
Input:
• 24VDC Class 2 power supply (polarity not observed)
or 24VAC Class 2 plug-in transformer.
Power Consumption (under maximum load):
• eBridge1PCR: 24VDC/1,000mA, 24VAC/900mA.
eBridge1PCT: Powered by eBridge1PCR.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) delivered to
camera by eBridge1PCT. Power provided by
eBridge1PCR to eBridge1PCT by PoE protocol.
• Throughput is rated to pass 25mbps of data at
distances up to 457m with proper headend
equipment which supports Megapixel, HD720, HD1080.
Coax:
• Distance: up to 457m for power delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• eBridge1PCR:
Blue LED - Coax link connection.
Green - PoE ON.
Green - Power ON.
Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• eBridge1PCT:
Blue LED - Coax link connection.
Green LED - PoE from eBridge1PCR.
Environmental:
• Operating Temperature:
eBridge1PCR: --- 20ºC to +45ºC (--- 4ºF to 113ºF).
eBridge1PCT: --- 20ºC to +60ºC (--- 4ºF to 140ºF).
Environmental (cont’d):
• Storage temperature: --- 30º to +70ºC (-- 22º to 158ºF).
• Relative humidity: 85%, +/--- 5%, non-condensing.
• Operating altitude: --- 304.8 to 2000m
(--- 1000 to 6,561.679 ft. ).
Electrical:
• BTU/Hr.:
- 24VDC: 12.28 BTU/Hr.
- 24VAC: 11.1 BTU/Hr.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital network
in Retail, Hospitality, Arenas, Casinos, Airports,
Schools, Hospitals, Transportation, etc.
Mechanical:
• Lightweight molded compact insulated housing.
• Dimensions (W x L x H approx.):
eBridge1PCR:
3.5” x 4.375” x 1” (88.89mm x 111.125mm x 25.4mm)
eBridge1PCT:
2.5” x 4.375” x 1” (63.5mm x 111.125mm x 25.4mm)
• Product weight: 0.4 lbs. (0.181 kg).
• Shipping weight: 1 lb. (0.45 kg).
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
European Conformity
C-Tick Compliant
Z1409
eBridge1PCRT is a single port EoC Receiver and Transceiver kit that transmits
data and power over coax cable. eBridge1PCR generates PoE up the coax to
an eBridge1PCT transceiver. The transceiver in turn delivers that PoE compli-
ant power to an edge device/camera. This plug and play unit facilitates system
upgrades from analog to IP utilizing existing legacy Coax and eliminates the
costs and labor associated with installing new network cabling. Data transmis-
sion and power over the Coax is possible up to 457m in comparison to 100m
Ethernet distance (CAT5e). A maximum range from head end to the edge
device/camera is 657m taking into consideration that up to 100m of structured
cable may be deployed from the receiver to the network switch and the trans-
ceiver to the edge device/camera.
eBridge1PCR
Overview
eBridge1PCT