Installation Guide

eBridge100ST - 1 -
PLUS
Overview:
eBridge100ST EoC transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired
eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera.
The eBridge receiver is available in various options (see compatibility list below/Altronix.com)
and is powered by an external midspan, such as the Altronix Netway series. The receiver passes
PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this
power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions
for IP devices. They can be installed at distances greater than 300m. They provide a simple way to
replace legacy analog products with new IP devices over existing coax.
Features:
Rev. 111714
Installation Guide
eBridge100ST - EoC and PoE/PoE+ Transceiver
I.T.E. 43KC
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
Input:
• PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W)
from eBridge receivers.
Compatible Receivers:
• eBridge100RM, eBridge400PCRM,
eBridge800PCRM, and eBridge1600PCRM.
Visit www.altronix.com for the latest
compatibility list.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5.
• Distance: up to 500m.
• Speed: 10/100BaseT, half/full duplex, auto
negotiation.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W)
Delivered to camera by eBridge100ST.
Power provided by eBridge receiver to
eBridge100ST by PoE protocol.*
• Throughput is rated to pass 100mbps of
data at distances up to 500m.
Coax link:
• Distance: Coax 300m (Maximum Length of
Coax Type vs. Camera Power/PoE Class,
pg. 4) for power delivery.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• Yellow - PoE ON (by respective RJ45 jack).
• Yellow and Green LED (RJ45) IP Link
status, 10/100Base-T/active.
• Blue: Coax Link is active.
Environmental:
• Operating Temperature:
For 15W: --- 40ºF to 167ºF (--- 40ºC to 75ºC).
For 30W: --- 40ºF to 140ºF (--- 40ºC to 60ºC).
• Storage Temperature:
--- 40ºF to 167ºF (--- 40ºC to 75ºC).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog
CCTV installation.
• Works with Megapixel, HD720, HD1080
and VGA (SD) cameras (see note, pg. 2).
• Extend Network link distance in an industrial
environment over 610m (see note, pg. 2).
• Upgrade deployed CCTV Coax to a digital
network in Retail, Casinos, Airports,
Schools, Hospitals, etc.
Mechanical:
• Dimensions (W x L x H approx.):
2.27” x 2.645” x 1.12”
(57.66mm x 67.18mm x 28.44mm)
*See note on page 3.