ATBM603X Wi-Fi Module User Manual ATBM603X Wi-Fi Module User Manual Ver. 0.1 Document version: 0.
ATBM603X Wi-Fi Module User Manual 1. Overview ATBM603X module is a highly integrated and excellent performance 802.11/b/g/n Wireless LAN (WLAN) 1T1R device with USB interface (USB 1.0/1.1/2.0 compliant). ATBM603X module is based on AltoBeam’s ATBM603X chip. ATBM603X module supports all data rates of IEEE 802.11b, 802.11g, and 802.11n. Features includes one spatial stream transmission, short guard interval (400ns GI), and transmission over 20MHz and 40MHz bandwidth. ATBM603X module WLAN MAC supports 802.
ATBM603X Wi-Fi Module User Manual 8) Humidity: 5% to 90% maximum 9) Dimension: 13mm*12.2mm (L*W) 4. Block diagram PA Antenna TX USB Host Filter and Matching circuit BBP LNA MAC USB2.0 SRAM OTP ROM LDO RX DCXO 24MHz XTAL 5. Outline drawing and pin definition 3 3.
ATBM603X Wi-Fi Module User Manual Pin Number Pin Name Pin Description 1 3.3V 2 U- USB Data DN 3 U+ USB Data DP 4 GND 5 RF GND 6 ANT External Antenna (2.4GHz 50ohm) 7 GND Ground 8 XTAL_P 9 SCL I2C SDA/UART TXD 10 SDA I2C SDA/UART RXD 3.3V DC power supply input Ground RF ground 24MHz XTAL input for Wi-Fi chip 6. Solder reflow profile Referred to IPC/JEDEC standard.
ATBM603X Wi-Fi Module User Manual Regulatory Module Integration Instructions 2.2 List of applicable FCC rules This device complies with part 15.247 of the FCC Rules. 2.3 Summarize the specific operational use conditions This module can be used in household electrical appliances as well as TV and IP camera. The input voltage of module should be 3.0~3.6VDC. 2.4 Limited module procedures This module can be used in TV, IP camera and household electrical appliances.
ATBM603X Wi-Fi Module User Manual transmitters where the certification is based on testing each of them in a stand-alone configuration. It is important to note that host product manufacturers should not assume that because the modular transmitter is certified that they do not have any responsibility for final product compliance. c) If the investigation indicates a compliance concern the host product manufacturer is obligated to mitigate the issue.
ATBM603X Wi-Fi Module User Manual FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
