ATBM601X Module User Manual ATBM601X Module User Manual Ver. 0.1 Document version: 0.
ATBM601X Module User Manual 1. Overview The ATBM601X module can be used in Wireless cameras, TV set and other devices that need to connect Wi-Fi networks. In order to allow you to install and use the product easier, please read this manual carefully. 2. Product characteristics 1) Support Wi-Fi 2.4GHz IEEE 802.11b/g/n, 1T1R 2) Operating frequency: 2.412 ~ 2.462GHz 3) Modulation 802.11b: CCK (11, 5.5Mbps), QPSK (2Mbps), BPSK (1Mbps) 802.11g/n: OFDM 4) PHY data rates 802.11b: 11, 5.5, 2, 1Mbps 802.
ATBM601X Module User Manual 4. Pin definition 12.2±0.2 2.38 GND 5 ANT 6 4 GND 3 U+ 2.87 1.00 2.00 2.50 13.0±0.2 2 U- 1 3.3V 3.50 2.80 Pin Number Pin Name Pin Description 1 3.3V 3.3V DC power supply 2 U- USB DN 3 U+ USB DP 4 GND Ground 5 RF GND RF Grand 6 ANT Wi-Fi antenna pin (2.4GHz 50ohm) 5. FAQ Q: Why USB cannot be connected? A: a) Please check if USB DC power of module is supplied. b) Please check if USB lines are connected correctly.
ATBM601X Module User Manual 6. Warning 1. Do not use this product under humid or hot conditions. 2. Do not use overloaded. 3. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
7.Regulatory Module Integration Instructions 7.1 List of applicable FCC rules This device complies with part 15.247 of the FCC Rules. 7.2 Summarize the specific operational use conditions This module can be used in household electrical appliances as well as TV and IP camera. The input voltage of module should be 3.0~3.6VDC. 7.3 Limited module procedures Not applicable 7.4 Trace antenna designs Not applicable 7.
b) The testing should check for emissions that may occur due to the intermixing of emissions with the other transmitters, digital circuitry, or due to physical properties of the host product (enclosure). This investigation is especially important when integrating multiple modular Dipole Antenna, 2.25dBi transmitters where the certification is based on testing each of them in a stand-alone configuration.