DESIGNER SOLUTIONS MANUAL PART NUMBER: 400-0520-001 SP107-101/101C FURNITURE MOUNT INTERCONNECT BOX USER’S GUIDE
DESIGNER SOLUTIONS TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL..........................................................2 INSTALLATION PRECAUTIONS .......................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR SP107-101...................................... 3 TECHNICAL SPECIFICATIONS............................. 3 PRODUCT DESCRIPTION ...................................
DESIGNER SOLUTIONS PRECAUTIONS / SAFETY WARNINGS 1.3 CLEANING 1 • Surfaces should be cleaned with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit. 1.4 FCC NOTICE Please read this manual carefully before using your SP107-101 AV Interconnect. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your SP107-101 and to prevent fire and shock hazards.
DESIGNER SOLUTIONS ABOUT YOUR SP107-101 2 TECHNICAL SPECIFICATIONS Specifications are subject to change. See www.altinex.com for up-to-date information. SP107-101 Surface Mount AV Interconnect Plate FEATURES/ DESCRIPTION The SP107-101 is designed for use in a table, podium, or other piece of furniture and is part of the many interconnection solutions offered by ALTINEX.
DESIGNER SOLUTIONS MECHANICAL SP107-101 Max. Table Thickness 3.0 in (76 mm) Width 6.4 in (163 mm) Depth 4.4 in (112 mm) Height (from surface down, not including cables) 3.0 in (76 mm) Net Weight SP107-101 2.4 lb (1.1 kg) Net Weight Extension Cables 2.2 lb (1.0 kg) Shipping Weight (approx.) 6.1 lb (2.8 kg) Material Power Rating (pass-through AC power) Table 3. SP107-101 Electrical 0.
DESIGNER SOLUTIONS PRODUCT DESCRIPTION 400-0520-001 4 5
DESIGNER SOLUTIONS APPLICATION DIAGRAMS 5 DIAGRAM 1: CUTOUT DIMENSIONS 400-0520-001 6
DESIGNER SOLUTIONS DIAGRAM 2: DIMENSIONS 400-0520-001 7
DESIGNER SOLUTIONS DIAGRAM 3: SP107-101 INSTALLATION 400-0520-001 8
DESIGNER SOLUTIONS INSTALLING YOUR SP107-101/101C Step 1. Cut an surface. opening into the 6 TROUBLESHOOTING GUIDE furniture’s The SP107-101/101C supplied was carefully tested and no problems were detected. However, we would like to offer the following suggestions: Note: The furniture can be 3” or less in thickness. Always confirm dimensions before cutting to insure that specifications have not changed. Step 2. Insert the SP107-101/101C into the table cutout. Step 3.