MULTITASKER® MANUAL PART NUMBER: 400-0371-004 MT107-203 8-IN, TWISTED PAIR, SINGLE CHANNEL INPUT CARD FOR MATRIX SWITCHER USER’S GUIDE
MULTITASKER TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS................ 2 GENERAL..........................................................2 INSTALLATION..................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR MT107-203....................................... 3 TECHNICAL SPECIFICATIONS.............................. 3 PRODUCT DESCRIPTION ..........................
MULTITASKER PRECAUTIONS / SAFETY WARNINGS • 1 Please read this manual carefully before using your MT107-203. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT107-203 and to prevent fire and shock hazards. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel or their authorized representatives must perform all service. 1.
MULTITASKER ABOUT YOUR MT107-203 2 TECHNICAL SPECIFICATIONS Specifications are subject to change. See www.altinex.com for up-to-date information. MT107-203 8-In, Twisted Pair, Single Channel FEATURES/ DESCRIPTION GENERAL Input Connectors Twisted Pair Input Output Connectors Twisted Pair to Engine Compatibility The MT107-203 is an 8 Input expansion card for use with the MT107-104 64X64 Matrix Engine®.
MULTITASKER PRODUCT DESCRIPTION 4 TOP RETAINER SCREW 8 1TP INPUTS BOTTOM RETAINER SCREW 400-0371-004 4
MULTITASKER APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP MT107-203 M 7 S8 MS CT 30 9 1 DA D 400-0371-004 5 9 A1 30 CT 04 0 87 TP 4T P
MULTITASKER DIAGRAM 2: INTERNAL VIEW POWER IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4 TWISTED PAIR RJ-45 OUTPUT 40-PIN IDC IN5 OUT5 IN6 OUT6 IN7 OUT7 IN8 OUT8 SIGNAL DETECT 400-0371-004 6
MULTITASKER INSTALLING YOUR MT107-203 6 OPERATION Step 1. Turn off power to the MultiTasker enclosure and remove the input AC power cord. 7.1 RS-232 CONTROL The MT107-203 has many advanced remote-control capabilities as part of an MT107-104 Matrix Switcher. These capabilities are accessible through standard RS-232 communication. The actual controlling can be accomplished through a computer control system or any other device capable of sending RS-232 commands. Step 2.
MULTITASKER Cause 3: The path is not selected. ALTINEX POLICIES Solution: Make sure the input to output path is correctly selected. 9.1 LIMITED WARRANTY/RETURN POLICIES Please see the ALTINEX website at www.altinex.com for details on warranty and return policies. For example, Input 2 is connected to Output 1 in the Matrix Engine status. Physically, the source signal should be connected to Input 2 and the display cable should be connected to Output 1.