DISTRIBUTION AMPLIFIER MANUAL PART NUMBER: 400-0045-006 DA1907LX DITTO-AMP, 1-IN 2-OUT VGA DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIER TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL..........................................................2 HANDLING ........................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR DA1907LX ...................................... 3 TECHNICAL SPECIFICATIONS............................. 3 PRODUCT DESCRIPTION ..............
DISTRIBUTION AMPLIFIER PRECAUTIONS / SAFETY WARNINGS 1.4 FCC NOTICE 1 Please read this manual carefully before using your DA1907LX and keep it handy for future reference. These safety instructions are to ensure the long life of your DA1907LX and to prevent fire and shock hazards. Please read them carefully and heed all warnings. • 1.1 GENERAL • • • Do not open the unit or power supply case; there are high-voltage components inside. There are no user serviceable parts inside.
DISTRIBUTION AMPLIFIER ABOUT YOUR DA1907LX 2 TECHNICAL SPECIFICATIONS Specifications are subject to change. See www.altinex.com for up-to-date information. DA1907LX Ditto-Amp, 1-In 2-Out VGA Distribution Amplifier FEATURES/ DESCRIPTION The DA1907LX (Ditto-Amp) is a high-resolution, 1-In 2-Out Distribution Amplifier designed to allow the connection of a single VGA-UXGA source to up to two scan-rate compatible displays.
DISTRIBUTION AMPLIFIER MECHANICAL DA1907LX Material ELECTRICAL Input Video Signal 0.1 in Al Finish Gray Analog Signal Level Top Panel Lexan Impedance Height 3.0 in (76 mm) Width 4.5 in (114 mm) Depth 1.0 in (25 mm) Weight 0.5 lb (0.2 kg) Shipping Weight (approx.) 1.0 lb (0.5 kg) T° Operating 10°C-35°C T° Maximum 45°C Humidity Coupling 1.5 Vp-p max 75 ohms DC Input Sync Signal Horizontal/Vertical or Composite Sync on Green Impedance TTL (+/-) -0.
DISTRIBUTION AMPLIFIER PRODUCT DESCRIPTION 4 POWER/SIGNAL PRESENT LED COMPUTER VIDEO OUTPUT 2 15-PIN HD COMPUTER VIDEO INPUT 15-PIN HD COMPUTER VIDEO OUTPUT 1 15-PIN HD DC POWER 2.5 mm COMPUTER VIDEO OUTPUT 2 15-PIN HD COMPUTER VIDEO INPUT 15-PIN HD COMPUTER VIDEO OUTPUT 1 15-PIN HD 400-0045-006 DC POWER 2.
DISTRIBUTION AMPLIFIER APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP DIAGRAM 2: INTERNAL VIEW 400-0045-006 6
DISTRIBUTION AMPLIFIER INSTALLING YOUR DA1907LX 6 OPERATION 7 Step 1. Connect the +9V AC adapter input to AC voltage and the output plug to the DA1907LX. Verify the LED in the top right corner of the unit’s front panel turns on and RED. The DA1907LX requires no adjustments for performance. Once set-up, the DA1907LX will work trouble-free without user intervention. Step 2. Connect the video output from the computer to the computer input connector on the DA1907LX using the cable provided.
DISTRIBUTION AMPLIFIER 8.3 NO REMOTE IMAGE Cause 1: The source has a problem. Solution: Check the image on a local monitor and verify the quality is good. If the local image is good, see Cause 2. Cause 2: Cable connections are incorrect. Solution: Make sure that all the cables are connected properly and that the continuity and wiring are good. If there is still no image, call ALTINEX at (714) 990-2300. ALTINEX POLICIES 9.1 LIMITED WARRANTY/RETURN POLICIES Please see the ALTINEX website at www.
